What are the contents of garbage truck maintenance?

Different garbage trucks, different driving habits, different driving environments, in fact, it is difficult to have a more standard maintenance guidelines, but also have to be familiar with how to maintain, what to maintain, how to maintain, the first two are free maintenance, so I want After this, maintenance must be done to do homework...

Monthly maintenance

Inspect the car, check the damage of the lamp and the lampshade; check the fixing of the car body accessories; check the situation of the reversing mirror. Check the tire's wear condition and clean up the luggage compartment. When you approach the tire's wear sign, you should replace the tire to check if the tire has bulges, abnormal main wear, aging cracks, and hard injuries.

Thoroughly clean the interior of the car; clean the exterior of the tank, the exterior of the oil radiator, and the debris on the exterior of the air conditioner radiator.

Check the chassis for oil leakage. If any oil leakage traces are found, check the Gear oil volume of each assembly and make appropriate replenishment. Make sure that all the grease nipples in the chassis are fully greased.

Half-year maintenance

Clean the exterior of the engine and pay attention to the waterproof treatment of the electrical parts.

Wipe the dirt inside the distributor cap with a clean rag, remove the dirt at the contact of the distributor, eliminate the marks of the contact ablation, check the gap of the high-speed contact or the magnetic pole gap of the electronic ignition system, and lubricate the distributor. point.

In the past, the usual method was to use compressed air to blow off the air filter dust, listen to professional introduction, it is not recommended to purge, and it should be directly replaced; timely replacement of fuel filter and cleaning the filter of the pipe joint; replacement of oil and oil Filters, this time I just do six months maintenance, oil filter is replaced by MANN brand oil filter, W712/22 this model ~ want to buy directly on the next Taobao, the price is more affordable, just do not know Authentic or not

Check the tire's wear and replace the tire. Check the hub and bearing preload conditions. If there is a gap, adjust the preload.

Check and adjust the working stroke of the hand brake lever; check and adjust the shoe clearance of the drum hand brake; check the free travel of the brake foot of the adjustment foot; check the wear of the brake shoe of the wheel, and replace the brake shoe if the wear sign is reached; Adjust wheel brake shoe clearance; check for additional brake fluid, etc.

Check the tightness of the important bolts or spirals of the chassis, especially the important bolts and spirals of the steering system. If loose or missing parts are found, they should be tightened.

Check the piping of each part of the chassis to see if there is any leakage, check the fastening of all metal connecting rods, and inspect the rubber bushings for damage. Grease the lubrication points of the chassis.

Check and repair car lights, check maintenance cooling, heating devices, clean sound system, etc.

Annual maintenance content

Check and adjust the ignition timing of the automobile engine. It is advisable to check and adjust the timing of the fuel supply of the diesel engine to the repair shop. For an ordinary valve engine, check the high-speed valve clearance.

Cast iron Fitness

Rubber Weight Plates,Iron Custom Kettlebell,Fitness Dumbbells

Seger Industrial Co., Ltd. , http://www.qddiecastings.com