The recently launched coke steamed ammonia production of Langfang Jinsheng Energy Saving Technology Service Co., Ltd. has a good economic benefit by using heat transfer oil instead of steam heating technology. According to calculations, the coke plant of 1.5 million tons/year will use the technology to achieve an annual profit of more than 8 million yuan.

According to reports, the traditional ammonia steaming process generally uses cast iron grid towers or bubble cap towers. The direct steam distillation technology is used. The disadvantages are low efficiency, high energy consumption, environmental pollution and serious equipment corrosion. Heat transfer oil instead of steam Heating steamed ammonia production technology uses coke oven gas as fuel to heat the heat-conducting oil furnace to increase the temperature of the heat-conducting oil, instead of steam, it is used to distill ammonia. This technology can increase the efficiency of ammonia evaporation, stabilize production, reduce production energy consumption, and improve the operating environment.

Thermal oil is an organic carrier. It has good fluidity, high temperature resistance, good thermal stability, strong oxidation resistance, large thermal conductivity, non-toxic, tasteless and non-corrosive. The use of thermal oil instead of steam as the ammonia heat source solves the problem of high energy consumption of steamed ammonia and overcomes the impact of steam stress in winter on production. At the same time, as the new steam-evaporation process eliminates direct steam, it can reduce the amount of sewage produced by 9 tons/hour, and annual reduction of wastewater is 78,800 tons.

In addition, the heat conducting oil station not only provides heat source for steaming ammonia station after putting into operation, but also provides heat source for desulfurization station and ammonium sulfate station, and provides 1/3 of the total heat for steaming ammonia station.

Plastic Air Blow Gun, Air duster, Dill safety blow gun, Central pneumatic air rubber tip blow gun, 1/4" air blow gun Air Hose gun, Telescoping air blow gun air duster garage cleaning, Pneumatic t tool air blow dust gun for pneumatic machine, Air gun Air duster gun Air blow gun, Extended air blow gun with 2 FT long nozzle extension 24" long w/rubber tip, Extension tube air blow gun, Zinc alloy/metal air blow guns

Air blow gun is Ideal for the technician, carpenter hobbies and home workshop. It comes with a high pressure nozzle and is compatible with most standard attachments. Works with all compresses and is a must for home and shop. Different sizes, different styles are available. More designs are available. Mainly used for blowing off dust and metal particles. Plastic blow gun, angled nozzle easily gets into tight places. Comfortable lever control and insulated handle. Ergonomic grip, high impact plastic body with built-in hanger slot, brass inlet with 1.4" fpt, recommended air pressure 90-120psi. Dill safety blow gun, the built-in restrictor cannot removed and limits tips pressure to 30psi and inlet pressure to 150psi or less, conforms to federal safety regulations, 1.4" fpt.

Air Blow Gun

Air Blow Gun, Tire Inflator Gun, Air Pressure Gauge

NINGBO HAISHU SOONG AUTO PARTS CO., LTD. , http://www.soongautoparts.com