If a sprinkler car overheats on the highway, the heater must be fully opened and the window must be opened immediately. At this time, the inside of the sprinkler will be heated like a steamer. Because the warm air helps the cooling water to dissipate heat, the cooling water temperature can be greatly reduced. In this way, you can continue to drive, find the exit of the expressway nearby, and drive the car to a safe place to stop. Next, just follow the method described above to bring down the temperature of the engine.

If the engine of a sprinkler overheats on an ordinary road, it should be lowered as quickly as possible, drive the car under shade of trees, or drive to a relatively cool place to stop the car. Open the engine cover and allow the engine to idle and wait for the engine temperature to gradually return to normal. After the engine water temperature returns to normal, turn off the engine. Then wait for a period of time until the water temperature of the engine has dropped sufficiently and then check the cooling water volume of the engine. At this time, the amount of engine cooling water is seriously insufficient. After replenishing the cooling water according to the specified amount, check the cooling system again. After confirming that there are no other faults, start the engine and continue driving.

electrode and wire

Carbon Steel Electrode,Mig Welding Wire,Welding Electrode,Co2 Welding Wires

Zhengtai Welding Equipment Co., Ltd. , http://www.ztweldingmachine.com