The more simple and easy to understand the product, the more attention it has to pay attention to. Many of the seemingly faulty issues are caused by the lack of regular maintenance of the temperature bath.

     For a constant-temperature circulating water tank factory, there will be a small amount of impurities in the water. The general temperature is set at 20 °C. It is particularly suitable for the growth and reproduction of microorganisms. After a long time, these microorganisms will clog the water filter to cause backwater. Poor, the pump will have a loud noise. The microorganisms attached to the surface of the heat exchanger cause the heat transfer effect of the heat exchanger to deteriorate and the cooling capacity to become smaller. In addition, the electric power of the water circulation of the water tank and the heat removed by the refrigerant from the load need to be excluded from the radiator at the front air hood. If the front air hood is filled with dust, cotton, etc. will hinder the dissipation of these heat for a long time, the cooling effect will be A substantial reduction, if not cleared, can easily lead to instrument burnout due to electric heat. When the relative humidity in the environment is too high, the relative humidity in the air is too high, and the water pump, the water pipe connector, and the external water pipe in the water circulation waterway are likely to be dew-condensed, and when they accumulate much, they will drop to the ground. Lowering the room temperature or dehumidifying can prevent dew.

Therefore, we must strictly follow the requirements in the manual and do regular maintenance work.

??

ARGO Filters

Argo Filters,Industrial Argo Filters,Argo Filter Element,Argo Replacement Filter

Henan Sinofiltec Technology Co.,Ltd , https://www.airfilters.pl