Anhui Tiankang thermal resistor installation and measurement requirements
Aluminum Die Casting Communication Equipment Parts are a metal forming process in which molten aluminum metal is put under pressure and injected into a die.
Aluminum Die Casting Communication Equipment Parts are lightweight alloys that have good corrosion resistance, mechanical properties, high thermal and electrical conductivity and strength at high temperatures. Aluminum alloys possess high dimensional stability for complex shapes and thin walls.
1. If there is a curve, it should be installed at the bend of the pipe.
2, is responsible for the resistance of the thermal resistance, its sealing surface must be sealed.
3. The cover of the thermal resistance junction box should be as far as possible to prevent it from being immersed in water.
4. When the thermal resistance is installed on the negative pressure pipeline or container, the installation place should be sealed well.
5. The mounting position of the thermal resistor needs to be kept as vertical as possible to prevent deformation of the thermal resistance protection tube at high temperatures.
6. The installation location of the thermal resistance should be chosen in a location that is convenient for construction and maintenance and is not vulnerable to external damage.
7. The part of the thermal resistance exposed outside the equipment should be as short as possible and thermal insulation should be added in order to reduce heat loss and measurement error.
8. In the case that the medium to be measured has a flow velocity, it should be placed on the center line of the pipe and be opposite to the direction of the fluid to be measured.
9. When the thermal resistance is installed on the pipeline, the socket must be installed on the pipeline. The socket must be firmly connected with the pipeline and the materials must be the same.
10. The depth of insertion of the thermal resistance can be determined according to the actual situation, but the length of the immersion in the measured medium should be more than 8 to 12 times the outer diameter of the protection tube.
11. When the thermal resistance is installed in a medium with solid particles and high flow rate, a protective plate can be installed in front of it to prevent damage due to long-term erosion.
12. When it is necessary to install it horizontally, it shall be equipped with a bracket made of fire-resistant clay or heat-resistant metal to support it, and the outlet hole of the terminal box shall be downwards, so as to prevent water vapor from entering due to poor sealing.
Five series of instrument products such as temperature, pressure, level, flow rate, and complete sets produced by Anhui Tiankang Company are in the leading position in quality and scale in China. The self-developed supercritical thermocouples and thermal resistance products have passed the authority of the state. After certification, it has been widely promoted in the nuclear power industry. We will continue to expand the scale of production of instrument products, improve product quality, and strive to build the largest temperature instrument production base in China. Users are welcome to negotiate.
Aluminum weighs 1/3 of a comparable steel part. The Aluminum Parts would cost less to ship due to the weight and spend less expense than other manufacturing processes.
Aluminum Die Casting Communication Equipment Parts
Aluminum Die Casting of Communication Equipment Parts, Aluminum Die Casting, Casting parts, Aluminum Casting of Communication Equipment Parts
NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.bldiecasting.com