Nowadays, many domestic branded mobile phones can compete with international brands in terms of quality, experience, and other aspects, and they have a more affordable price than international brands, so the appeal to consumers is very large. Beidou mobile phone as a main cost-effective mobile phone manufacturers, recently launched a price of only 888 yuan eight-core smart phone Beidou Shallot X1. The Beidou Shallot X1 has excellent configuration and has a very affordable price. How does it perform? Here's to uncover the veil of Beidou Shallot X1.

Although the price is less than a thousand dollars, the hardware configuration of Beidou Shallot X1 is also more luxurious. The Beidou Shallot X1 is equipped with a powerful MT6592 eight-core 1.7GHz processor, equipped with 1GB+16GB of memory, a 5-inch 720P screen, a mainstream 13 million 800-megapixel camera, and a 1900-mAh battery. What is more special is that the work of Beidou Shallot X1 is very good. It adopts the design of an integrated metal fuselage, and the metal part also uses an anodizing process. The thickness of the whole machine is only 6.8 mm. The workmanship can be said to be the same level of mobile phones. The best of them.

As a true eight-core model with a cost performance, Beidou Shallot X1 sells for only 888 yuan. Although the price is not high, it is very close to the people, but the appearance of the Beidou Shallot X1 has not shrunk. It is much better than many thousands of quad-core phones. The appearance of the Beidou Shallot X1 is very exquisite and stylish. It adopts a one-piece metal fuselage. The thickness of the whole body is only 6.8 mm, which can bring excellent look and feel. In addition, the Beidou Shallot X1 has also added a 2.4mm ultra-narrow frame, aviation-grade aluminum alloy rear cover, and the metal back cover surface has been added anodizing process, the whole texture is very good.
Due to the integrated metal body design, the design of Beidou Shallot X1 is also relatively compact. Above the fuselage of the Beidou Shallot X1 is equipped with a handset, sensors and a front-end 8 megapixel camera. In addition to the high pixel height, this camera also supports a 88-degree wide-angle self-timer, and the self-shot effect is excellent. However, some regret is that the Beidou Shallot X1 is not equipped with lights.

The three buttons below the Beidou Shallot X1 are touch-sensitive, and the feeling of workmanship is also more refined. However, like many thousands of machines, the three buttons do not support the backlight.
In other details of the fuselage, the Beidou Shallot X1 sets the phone's headphone jack and data cable port on the top and bottom, respectively, while the left side of the phone has two Micro SIM card slots. This is slightly inconvenient. Both SIM card slots require a pin to open; on the right are the phone's volume and lock buttons, and a noise-canceling microphone. Worthy of praise is that the body of the Beidou Shallot X1 button is also made of metal material, feel very good.
The back of Beidou Shallot X1 is also a popular three-stage design. The whole body is made of integrated metal material. The upper and lower ends are made of plastic material. The middle part is the back cover of metal material. The surface of the back cover is adopted. The same anodizing process as the iPhone 5 makes the texture very good and has the advantages of corrosion resistance and wear resistance. On the back of the Beidou Shallot X1 is a 13-megapixel camera and flash light. The bottom of the phone is the speaker of the mobile phone, and the metal back cover is marked with a green LOGO.
Battery, due to the slim thickness of the machine 6.8 mm, so only built a 1900 mAh battery, Fortunately, MediaTek's true eight-core control in power consumption is relatively good, so the Beidou Shallot X1 battery life is also Maintained at the mainstream level, under normal circumstances, can also fully adhere to a day's time, endurance capacity is acceptable.

Cold steel Bending Machine: we supply high quality steel bending machine, hydraulic Bending Roll Machinery and manual bending machine, This bending machine can make according to client's requirement. We also supply single cutting machine, shearing machine. And there are small type and huge type. Automatic sheet metal cutting and bending machine.

Cold Steel Bending Arching Machine

Hidraulic Arch Roofing Roll Forming Machine,Steel Plate Metal Cutting And Bending Machine,Long-Span Arch Roll Forming Machine,Bending Machine,Arching Machine

Xianfa Roll Forming Machine Factory , http://www.btxianfa.com