Green Power, Red Exterior, V3M Amazing Natural Gas Auto Show
M. series pumps are also called Light Duty Slurry Pumps, are designed for continuous pumping of fine particle size and middle density slurries. The pump body has a replaceable wear resistant metal liner and the impeller is made of wear-resistant metall. They are used in metallurgical industry, mining, coal, power, building material and other industrial departments etc. The pumps of this type may also be installed in multistage or/and in series.
Product Feature
1. The wet parts is made of wear-resisting metal ,has good wear-resisting, corrosion resistance and the high reliability.
2. The shaft is sealed by way of packing seal. The expeller dynamic seal and other mechanical seal arrangements are among options, too.
3. High capacity bearing design.
4. The clearance between the impeller and the cover plate could be adjusted to ensure the pump to operate at high efficiency point.
5. The discharge branch can be positioned at intervals of 45 degree by request and oriented to any eight positions to suit installation and application.
M Series Light Duty Slurry Pumps M Series Light Duty Slurry Pumps,Light Duty Slurry Pumps,10/8R-M Light Duty Slurry Pump,10/8E-M Light Duty Slurry Pump, Light Duty Sludge Pump,Metal Light Duty Slurry Pump,Variable Frequency Drive Light Duty Pump,M Series Light Duty Slurry Pump Shijiazhuang Soarho Machinary Co.,Ltd , http://www.xhslurrypump.com
On May 7, the 15th China International Natural Gas Vehicle and Gas Station Equipment Exhibition was grandly opened at China International Exhibition Center (new museum). For years, Beiben Heavy Duty Truck Group, which has been committed to the development and upgrading of natural gas heavy trucks, is bringing the new 2014 V3M natural gas heavy truck products to the current auto show.
V3M natural gas heavy truck <br> <br> why so eye-catching red metal body, in the bright sunshine, especially eye-catching, coupled with quite atmosphere cab design, V3M bring the audience a unique visual experience, attracting Many people come to watch.
In addition to the appearance of eye-catching, Beiben Group's V3M products exhibited at this time is also a special place, that is, a lightweight design concept. The V3M chassis is a lightweight, narrow body heavy truck developed by Beiben to meet the standard transportation market. The products on display at this time are lightweight heavy truck applications for natural gas power. Of course, the lightweight natural gas heavy truck is not surprising. The surprising thing about this model is that as a 6×2 model, its weight is only 7 tons, which is a great advantage compared with the industry.
Detailed knowledge about this natural gas V3M natural gas heavy truck heavy truck <br> <br> Although the exhibition is the North Pennines Group's new products in 2014, but has been very mature, complete and reliable quality. The chassis of this model adopts a lightweight design concept. The cab is designed with a narrow body to achieve safe weight reduction and structural weight reduction. Some modules of the cab are made of special materials to further reduce the weight; the beam is designed with 280mm high-width straight beams and leaf springs. The use of fewer leaf springs before and after, once again reflects the lightweight design. More than that, each design detail of the V3M chassis embodies the concept of lightweight, quantitative change brings the final qualitative change, making the V3M a veritable lightweight heavy truck product. In terms of power, this model matches Weichai's 340-horsepower gas engine to achieve the country's five emission standards, Fast 12-speed transmission, 5.5 tons of front axle, 485 rear axle, speed ratio of 4.11, reasonable matching of power system, guarantee The power of the vehicle. The 500L double cylinder ensures that the V3M natural gas vehicle's cruising range can reach 1,000 to 1,100 kilometers.
North Ben heavy truck natural gas will continue to promote the development of <br> <br> In recent years, natural gas heavy truck fleet soared, according to industry statistics from May 2013 to May of this year, natural gas and heavy trucks rose by more than 80%, the pace of infrastructure construction Also accelerating, the country's existing LNG refueling stations have reached 1,898, an increase of 198%, and natural gas heavy trucks are in an unprecedented period of development opportunities. In Beiben, the product line of natural gas heavy trucks has been continuously improved. It has more than 300 models of natural gas vehicles for tractors, dump trucks, trucks, and special vehicles. Natural gas heavy trucks are available in the V3, V3M, and NG80 series. Demand. Beiben, as an advocate of natural gas heavy trucks for a long time, will continue to develop new products and introduce new technologies. Beiben will continue to promote the development of natural gas heavy trucks, bringing value to customers and contributing to environmental protection. This is both the need for self-development and the consideration of social responsibility.