Model NO.: MD-200A
Usage: Metal
Alarm Mode: Vibration or Sound and Light
High Sensitivity: 15 mm at Pin
Detection Distance: Around Coin 8cm Knife 15cm
Trademark: sunleader
Specification: CE ROHS ISO2008
Origin: Guangdong, China
HS Code: 8531901000
Model NO.: MD-200A
Usage: Metal
Alarm Mode: Vibration or Sound and Light
High Sensitivity: 15 mm at Pin
Detection Distance: Around Coin 8cm Knife 15cm
Trademark: sunleader
Specification: CE ROHS ISO2008
Origin: Guangdong, China
HS Code: 8531901000
High Sensitivity Hand-Held Metal DetectorMD-200A
Function: To detect hidden metal objects were found
Features:
1, using pull-action switches between the three stalls to switch sound alarm and vibration alarm hidden
2, high sensitivity, capable of detecting ferrous and nonferrous metals. Easy to use, convenient and sensitivity adjustment easier.
3, when the detection of metals with a sound (or vibration) and optical alarm functions at the same time
4, alkaline battery alarm at 10% -15% the proportion of the work, continuous work 40 hours or more.
5, the battery 9V to 7V put about the same detection range. The battery voltage is insufficient, it will automatically continuous alarm
| Operating frequency: |
20 Khz |
Weight: |
272 gincluding the battery |
| size: |
Length: 420mm width: 138mm height: 110mm |
handle measurement: |
30X30mm |
| Regulate the way: |
Manual |
Indicator: |
BZ, vibration motor |
| LED light proves: |
LED red warning indicator lamp LED green insufficient indicator lamp of voltage of indicator lamp LED battery of power |
| Battery: |
A 9V battery (suitable for working for 40 hours normally) |
Control: |
Circulation switch (ON, OFF, a sound of light or mode of vibration) |
|
Â
| characteristics |
| characteristics: |
|
| Characteristics: |
1 Use cycle-switch to switch sound alarm and hidden vibration alarm respectively |
| 2 Hight sensitive, detect ferror metal and non-ferror metal |
| 3 Sound and light alarm simultaneously |
| 4 Alkaline cell (7V-9V) can work over 40 hours and distance does not change |
| 5 Warn automatically when short of voltage |
| Detecting distance: |
Ferrous Metal |
Non Ferrous Metal |
| 11/2pin 10mm |
1aluminum& copper sheet 10 |
| 2model 64 pistol 150mm |
2DIP14 IC(integrate circuit) 5 |
| 36 inches dagger 150 |
3Silver ring 1g 40 |
| 48mm(diameter) 40 |
4Lead brick 1g 30 |
MD-200A
Function: To detect hidden metal objects were found
Features:
1, using pull-action switches between the three stalls to switch sound alarm and vibration alarm hidden
2, high sensitivity, capable of detecting ferrous and nonferrous metals. Easy to use, convenient and sensitivity adjustment easier.
3, when the detection of metals with a sound (or vibration) and optical alarm functions at the same time
4, alkaline battery alarm at 10% -15% the proportion of the work, continuous work 40 hours or more.
5, the battery 9V to 7V put about the same detection range. The battery voltage is insufficient, it will automatically continuous alarm
| Operating frequency: |
20 Khz |
Weight: |
272 gincluding the battery |
| size: |
Length: 420mm width: 138mm height: 110mm |
handle measurement: |
30X30mm |
| Regulate the way: |
Manual |
Indicator: |
BZ, vibration motor |
| LED light proves: |
LED red warning indicator lamp LED green insufficient indicator lamp of voltage of indicator lamp LED battery of power |
| Battery: |
A 9V battery (suitable for working for 40 hours normally) |
Control: |
Circulation switch (ON, OFF, a sound of light or mode of vibration) |
|
Â
| characteristics |
| characteristics: |
|
| Characteristics: |
1 Use cycle-switch to switch sound alarm and hidden vibration alarm respectively |
| 2 Hight sensitive, detect ferror metal and non-ferror metal |
| 3 Sound and light alarm simultaneously |
| 4 Alkaline cell (7V-9V) can work over 40 hours and distance does not change |
| 5 Warn automatically when short of voltage |
| Detecting distance: |
Ferrous Metal |
Non Ferrous Metal |
| 11/2pin 10mm |
1aluminum& copper sheet 10 |
| 2model 64 pistol 150mm |
2DIP14 IC(integrate circuit) 5 |
| 36 inches dagger 150 |
3Silver ring 1g 40 |
| 48mm(diameter) 40 |
4Lead brick 1g 30 |
EVA Embossed Sheet
EVA Embossed Sheet is also called micro dot sheet, made by a roller heat press for the surface texture. It has same function as the EVA Faux Teak Sheet, providing a non-skid feature and perfect protection for boat.
Made from marine grade UV-resistant, closed cell and high density EVA foam material, it brings good performance in the marine application, either for sea water or strong sun light.
Obviously it is also a DIY marine sheet for boat lovers, cut the sheets into size to fit the shape of boat decking, then just simply peel and stick. The micro dots on the surface not only provides a soft and comfortable feeling to feet, but also brings a suitable traction. Due to its sealed embossed surface, it is a lot easier to clean than the EVA faux teak sheet with brushed surface.Eva Embossed Sheet,Coaming Bolster Pads,Embossed Eva Foam Sheet,Eva Coaming Pads,Embossing Eva Rubber Sheets,Eva Boat Flooring Sheet
Huizhou City Melors Plastic Products Co., Limited , https://www.melorsmat.com
