The artificial climate incubator has the function of temperature control and humidity control. The temperature and humidity environment in the incubator can be precisely adjusted according to the experimental needs. For example, once the temperature and humidity range is set, when the humidity is insufficient, the artificial climate incubator will Automatic humidification until the humidity reaches the set humidity range. So how is the humidification function of the artificial climate incubator realized? Which part of the component is responsible for the humidification work?

Humidification of artificial climate incubators relies mainly on humidifiers to achieve the effect of humidification by atomizing water, which is in fact the same as the humidifiers used in our lives. However, the artificial climate incubator is an experimental box for cultivation and research. Therefore, the control requirements for temperature and humidity will be relatively high, and the intelligent management system equipped with it can make the temperature and humidity control precision higher. Once the humidification amount reaches the requirement, Then the system will automatically recognize and stop humidification to ensure that the temperature and humidity environment in the cabinet is always within the proper range, ensuring the smooth development of experimental research work.

The humidification accuracy of the artificial climate incubator is not only related to the control accuracy of the system, but also related to the working performance of the humidifier and whether the connected pipeline is blocked. If the humidifier has problems such as insufficient power, then the set humidity index is difficult to achieve, so in the normal process, pay attention to the maintenance of the humidifier to ensure its normal operation. Secondly, the blockage of the pipeline will also cause the humidity of the artificial climate incubator to rise. Therefore, cleaning and dredging the pipeline frequently is also an important task for the maintenance staff of the artificial climate incubator.

Of course, the above problems occur in the artificial climate incubator, or there may be a malfunction of the instrument and equipment. At this time, it is important not to disassemble and repair it in order to avoid danger or cause more serious damage to the equipment. The correct way is to contact the professional. The technician handles it.

Single Girder Gantry Crane is a middle and small size lifting equipment which runs at rails. It's mainly composed of gantry, hoisting mechanism,traveling mechanism and electric control part. With the Electric Hoist as histing mechanism, it runs along the lower flange of the I steel of the girder. The girder is of box-shape structure and truss structure. The box shape structure has good techniques and easy fabrication, and the truss type is light in dead weight and strong is wind resistance. The Gantry Crane features light dead weight, simple structure and easy installation and maintenance, so it's applicable to outdoor operational sites and medium and small lifting load for general handling such as factories, mines, freight yards and warehouses. It has three operation modes: ground handle, wireless remote control and cab room.

Single Girder Gantry Crane

Single Beam Gantry Crane,Single Girder Bridge Crane,Overhead Crane Single Girder,Single Girder Eot Crane

XINXIANG DEGONG MACHINERY CO., LTD. , https://www.degongcrane.com