Yihua 853D 5A 3 in 1 Soldering Station

August 13 08:26:14, 2025

YIHUA 853D 5A 3 IN 1 Hot Air Soldering Station With DC Power Supply


Features:
 
1. This all-in-one machine is designed based on the company's innovative technology to meet the demands of the communication market. It integrates a 30V/5A DC power supply, hot air gun, and soldering station, making it space-efficient, practical, powerful, and energy-efficient. One unit can fulfill most routine application needs.
2. Temperature control uses core technology with Samsung microprocessor-PID programming for high-speed 100ms real-time tracking of air gun outlet temperatures and soldering iron tip temperatures, with real-time calibration. Outlet temperatures are extremely stable.
3. PID high-speed 100ms rapid temperature calibration ensures energy efficiency, providing constant temperature power consumption much lower than comparable machines, offering greater energy savings.
4. The YH soldering iron handle wire uses high-temperature silicone wire (undamaged when 300°C soldering tip contacts the wire for 30 seconds). The heating element uses an imported high-power heater for fast temperature compensation, ideal for desoldering crude terminals, large joints, and hard-to-reach spots, as well as general solder joint desoldering.
5. High-precision DC-stabilized power supply features continuously adjustable output voltage of 0-30V DC and output amperage of 0-5A. The power supply also includes overload protection for high precision and reliability. The machine has a voltage measurement interface and can replace high-precision digital voltmeters for DC voltage readings.
6. The air gun handle wire similarly uses high-temperature silicone wire, a silent brushless-motor fan, stainless steel tubing, and a cutting-edge ceramic-framed heating core for extremely stable and reliable performance.
7. The unique ABS fan anti-lock function ensures maximum safety. If the fan unexpectedly stops and work stability cannot be controlled, the system will immediately cut off the air gun power supply to ensure user and environmental safety.
8. Pioneering handle safety protection, requiring a docked handle in the handle holder before machine operation. If not placed in the holder, the operator will not detect compliance with safety instructions, and the machine will not work. This prevents handle misplacement or accidental placement in unsafe or flammable locations that could lead to undesirable consequences.
Information regarding PID programming: The core algorithm sets a frequency for measurements, comparisons, and execution to be divided into rapid 20ms, high-speed 100ms, and fast 200ms hot air gun and soldering iron temperature controls. PID is one of the most important parameters for temperature accuracy and stability. Rapid 20ms is the fastest algorithm for AC220V 50Hz applications. Cycling at 20ms for each 50Hz half-wave, the program already has precise control of every power supply cycle—an industry first! A variety of high-end YIHUA hot air gun models use rapid 20ms cycles, and the soldering iron temperature calibration is set to the two standards of high-speed 100ms and fast 200ms cycles, as the temperature sensing location is within the ceramic heating core. Taking time for temperature conveyance to the soldering iron tip and back, high-speed 100ms cycles provide optimal control speeds! (The vast majority of existing programmable cycles in the industry can only reach 200ms–500ms).


Parameters
 
Rated Voltage AC 220V±10%  50Hz
Total Power ≤1000W
300ºC Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 250W±10%
Operating Environment 0~40ºC Relative Humidity<80%
Storage Temperature -20~80ºC Relative Humidity<80%
Dimensions  
Weight 7.26kg
parameters
Rated voltage AC 220V±10%  50Hz
Total power  
≤1000W
300ºC The thermostat power of (high-speed PID programmable energy saving) 250W±10%
Working environment 0~40ºC relative humidity<80%
Storage environment -20~80ºC relative humidity<80%
Dimensions  
Weight 7.26KG
Parts parameters Hot air rework Soldering iron
Operating Voltage AC 220V±10%  50Hz AC 26V±10%  50Hz
Output power 720W 75W
Temperature range 100ºC~480ºC 200ºC~480ºC
Air Supply Mode      Brushless-Motor Fan ---
Air Flow 120L/min(MAX) ---
  Temperature Stability ±1ºC (Static) ±1ºC (Static)
Display Type Red LED display Red LED display
Calibration Mode The PID digital program
 
 
proofreading		 The PID digital program
 
 
proofreading
PID Temperature Calibration Cycle Rapid 20ms High-Speed 100ms
Heating Core Ceramic columned heating element. Imported heater
Standard nozzles/tips (10mm,8mm,5mm,13mm)
4 PCS nozzles		 B
Tip ground impedance --- <2Ω
Tip of ground voltage --- <2mV
Power Supply
Operating Voltage  0~30V
Output Power 0-5A
Protection Mode Short Circuit Over current
Voltage Display Mode Red/Green LED Digital Display
Current Display Mode Pointer Display
Load Stability <0.01±2mv
Ripple and Noise <1mv rms (RMS)
 

Application Scope:

1) Electronic product assembly for industrial production
2) Product development for scientific research departments
3) Repair industry for electronic product inspection and maintenance
4) Soldering operations for electricians in various enterprises and institutions
5) Electronic assembly for electronic technology enthusiasts
6) Student skills training for a variety of electrical colleges
7) Suitable for a variety of component desoldering and soldering, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc.
8) Suitable for heat shrinking, drying, painting, adhesive removal, thawing, preheating, plastic welding, etc.
9) DC power supply suitable for scientific research, product development, laboratories, laptop maintenance, etc.

 
What's Inner Box

* main unit + gun + power cord
* guide
* soldering iron
* soldering iron holder + gun frame
* 4 nozzles
* 1pcs IC pick-up
* 1pcs alligator clip cable

These are 220V units, you may need a transformer to use the machine in your country. We also do accept special orders for 110V / 230V/ 240V units.

Yihua 853D 5A 3 in 1 Soldering StationYihua 853D 5A 3 in 1 Soldering StationYihua 853D 5A 3 in 1 Soldering Station

Our Warranty
*Credit Safeguard
GuangZhou YiHua Electronic Equipments Co., Ltd was signed a contract with Alibaba and paid a large deposit, making buyers feel comfortable buying.
 
*Factory Advantage
Factory R&D / production / sales / and sales service together. Manufacturing sells directly, goods are in plenty supply, delivery date fast, good competitive price. You could arrange to ship the goods by yourself, or ask us help you arrange to ship. If we help you arrange to ship. Before quoting the shipping freight, we need to know which model and quantity you are asking. We will advise you based on your detailed address, order model, and quantity to ship by sea, or by air, or by Express. As usual, we are using HongKong DHL to ship small orders.
 
*Delivery Date
As usual, 1~16 pcs are 1~3 days to ship out. Made in time, fresh from the assembly line.
Over 100~over 500 pcs are 20 days to ship out. Over 1000 pcs are 30 days.
If the material is not enough or we have some customers queue up our products before you,
we will discuss with you the shipping date. If you want the delivery date faster than that day, please inquire us, we will try to do it as your request.
 
*Warranty Policy
One Year warranty
As usual, the shipping fee is high. If return China to repair is not worth the money. So we could support technology and give you the spare parts along with the product.
Note warranty does not cover wearing parts, for example iron heater, gun heater, iron tips.
 
*Products Discount
As usual, we quote three prices for each model: sample price, over 60 pcs price, over 500 pcs price.
Those prices are calculated based on our production cost. As you know, big orders have less margin to sell. We hope to take win-win business with both.
 
*Warm-Heart Note
1. If products upgrade or quality improve to change the technical parameter, the factory will not further notify.
2. If the customer hasn't special request, the product is in accordance with the factory's setting quality standards to produce.

Foaming Agent

Ningbo Actmix manufactures and supplies the organic blowing agent Actmix ADC-50GE & Actmix OBSH-75GE, which application for the produce of sponge and foaming rubber articles based on natural and synthetic rubbers. The foaming temperature from 150℃ to 210℃.Lower mooney viscosity at lower temperature(50℃), with excellent dispersiblity, to ensure the foaming rubber parts with uniform fine structure.
Ningbo Actmix produce the microsphere foaming agent Actmix HDU/GE Actmix LDU/GE, with stable performance, non-flammable, non-pollution, non-toxic and tasteles, do not corrode the mold, non-staining the rubber parts; which are widely application for the sealing strip, sold and lightweight rubber products, etc.

Foaming Agent,Rubber Blowing Agent,Rubber Foaming Agent,Blowing Agents,Foaming Agent Masterbatch

Ningbo Actmix Rubber Chemicals Co.,Ltd. , https://www.predispersedchemical.com