What are the principles for cleaning internal components of desulfurization pumps?
filter,equipment,machinery ChangZhou FENGJU Machinery Equipment CO., LTD , https://www.fengjumachinery.com
No matter what kind of equipment needs to be cleaned after a period of use, of course, it is also true for the desulfurization pump. It can not only get twice the result with half the effort, but also prolong the service life of the desulfurization pump and reduce the loss of the enterprise. The correct cleaning method can be done with half the effort. Today I will introduce you to several parts of the desulfurization pump. The basic principles for specific removal are detailed later.
1. Scrape off the scale and rust accumulated in the inner and outer surfaces of the impeller and the seal ring and bearings. Then wash or blow with water or compressed air.
2. Clean the grease and rust accumulated on the joint surfaces of the desulfurization pump casing.
3. Clean the water seal tube and check if the tube is unblocked.
4. Clean the bushings and bearings of the desulfurization pump, remove the grease, and then clean the oil ring and the oil level gauge. Ball bearings are used for gasoline cleaning.