The largest passenger ship in China's maiden flight

The largest passenger ship in China's maiden flight On December 18th, the second luxury ro-ro ship "Wantonghai" jointly built by Dalian Port and Dalian Shipping Group successfully berthed at Dalian Bay Station, Dalian. It sailed at 9:00 pm on the 18th and officially entered Dalian Bay to Yantai route. Operation. The “Tongtong Hai” wheel with 1,600 passengers is by far the largest passenger ship in China. The vessel has a total length of 164 meters, a width of 25 meters and 24024 tons. It has a nearly 2000-meter lane and can carry 192 standard cars.

It is understood that this ro-ro ship was built in 2009 by Shandong Huanghai Shipyard with a depth of 7.9 meters, a net tonnage of 12,000 tons, a load-carrying tonnage of 23,000 tons, a maximum speed of 20.6 knots, a service speed of 18.5 knots, and Dalian to Yantai 5 Hours to arrive. The vessel has a capacity of 1,818 passengers, a crew of 81, and three levels of car cabins with a total height of 4.4 meters. After the ro-ro vehicle enters the mid-level vehicle compartment from the ramp, it can be easily and smoothly distributed to the ground floor or top-level automobile compartment by means of a lifting platform or ramp according to different vehicle models and load capacities.

Passengers can use the satellite TV reception system installed on the ship and the telephone signal reception enhancement system to watch TV programs of nearly 20 channels during the journey, and can receive and make calls throughout the journey. According to the port passenger transportation department, the “Wantonghai” wheel is the largest, fastest, safest, most advanced and smoothest passenger roll ship that China has designed and built on its own, and is also the most powerful ship in Dalian port. With the most fully-equipped ro-ro passenger ships, the tickets are divided into different grades to meet the needs of different levels of passengers. The schedule for entering and leaving Hong Kong is determined to be 21:00 at Dalian Bay and 8:00 at Yantai.

EVA Double Colors Sheet

EVA Double Colors Sheet is less one production process, which is cutting the grooves than the EVA Faux Teak Sheet. This kind of marine sheet is for customers who own a CNC machine to cut the customized pattern based on what they need.

EVA Double Colors Sheet

Through a CNC machine, you can make something beautiful more than a straight grooves. The CNC machine can help you to route a pattern, a name, a logo or whatever you like. Once it is done, then a simple peel and stick, the cut sheet can be applied on the boat decking without any more cutting.

EVA Double Colors Sheet

Also we are flexible on the colors combination. It can be any color in the bottom, and it can be any color on the top. We intend to provide the best customization for different requirements from different customers.

The standard thickness would be 6mm, but we can also offer a thicker material. For example, to make a customized helm station pad, the thickness should be at lease 13mm or even to 20mm, and this is what we can do for a better products service.

Eva Double Colors Sheet,Eva Marine Sheet,Eva Plastic Foam Sheet,Environmental Eva Foam Sheets,Double Color Eva Foam Sheet ,Double Colors Sheet

Huizhou City Melors Plastic Products Co., Limited , https://www.evafoammaster.com