The importance of the magnitude of the magnetic system declination in the magnetic separator

The magnetic separator of the mineral processing equipment is equipped with a magnetic declination indicating device on the shaft head on the transmission side, and the adjustment angle of the magnetic system can be adjusted by moving the adjusting nut. Adjusting the magnetic declination of the magnetic separator can effectively control the magnetic separation effect of the magnetic separator.

The angle of the magnetic declination of the magnetic separator is too large or too small, and the small size affects the quality of the concentrate, so that the particles with smaller magnetic properties have the opportunity to be selected, but the grade of the tailings is lowered, which is good for the recovery rate; Too large is good for improving the quality of concentrates, because only the particles with large magnetic properties have the opportunity to be selected. If the magnetic properties are small, there is no chance to come up and enter the tailings, which will increase the tailings grade and reduce the recovery rate.

Therefore, the size of the magnetic declination must be adjusted according to the operation requirements. Generally, the magnetic declination of the production site is adjusted to be around 15°-20°. Adjust the magnetic system yaw angle. If there are no changes in operating conditions and requirements during production, do not move easily.

Welded Mesh

Welded Wire Mesh Specification:
Materials:high quality low carbon steel wire ,Stainless steel wire ,copper wire ,brass wire .
Weaving and characteristics ;including galvanizing after weaving ,galvanizing before weaving ;coated PVC ,have the strong characteristic of antisepsis and contradicting oxygenation .
Uses:used widely in industry ,agriculture ,building ,transportation ,mine field ,lawn ,cultivation ,machine guard ,decorate ,etc.
Width:up to 2.5 meter

Lenght: 100`or by request

As a highly-accomplished wire mesh exporter, Kingdelong was established jointly by China and South Korea in 1986, Our strategic location in Anping County,Hebei province is only 300KM away from Beijing and Tianjin, which offers us very competitive advantages both in trade and logistics. Through two decades of hard work, Kingdelong company had evolved into one of China`s largest wire mesh manufacturing companies,Covering an area of over 200,000㎡, certificated by ISO 9001 & ISO 14001,as well as more than 450 diversified production machines, which are either imported from foreign countries or developed in-house.Wire mesh products find applications in a wide range of industries, from Pharmacy to petroleum and chemical to textile.

Welded Mesh,Welded Panel Fences,Galvanized Welded Panel,Expanded Metal Welded Panel

ANPING KINDELONG WIRE MESH CO.,LTD. , https://www.wire-mesh.org