The future trend and development trend of the advantages of the pedestrian channel gate

May 16 12:08:48, 2023

Pedestrian passage gates have developed rapidly in recent years and are becoming more and more intelligent, and have become a major trend in the security access control industry. At present, Yuming Electromechanical Technology makes the following analysis on the prospects, future trends and development trends of the pedestrian channel gate industry:
1. Most of the pedestrian access gates are now a combination of manual management and equipment management to improve the management area for effective management. It mainly utilizes the flexibility of manual management and the intelligent features of intelligent equipment, which makes the enterprise change from the full use of manual management to the combination of manual management and equipment management, which greatly improves the work efficiency and strengthens the use. The company's awareness of safety management has enhanced safety management.
2. In the future, with the increase of labor costs, people's consideration of cost, the combination of manual management and intelligent equipment will gradually be replaced by free visitor terminals, realizing unmanned and efficient management, self-service visitor terminals can be The self-service is provided to the visiting personnel, and the visiting personnel selects the company to be visited according to the prompt of the touch screen, and enters the personal information of the visitor according to the prompt. The system calls the reception desk of the visited company according to the pre-configured way to make a voice call or IP video call. After the confirmed company confirms the identity of the visitor, it enters a confirmation command, and the self-service visitor terminal spits out the visitor card to complete the visitor registration process. .
3. With the improvement of visual aesthetics, people will have higher requirements in the appearance of the channel gate equipment. In the increasingly fierce competition environment of the entrance and exit control system, it is believed that there will be more beautiful and practical, powerful. The technologically advanced pedestrian passage gate products are on the market, bringing people a new and intelligent technology experience.
Shanghai Yuming Electromechanical Technology Co., Ltd. is a new high-tech enterprise integrating R&D, production, sales and service. The company has been dedicated to the development, integration and application of channel gate system, access control system and ticket management system for many years. With years of experience accumulation and continuous technological innovation, we provide customers with reasonable intelligent attendance, access control, consumption, ticket management channel system solutions, construction of yiliu system engineering, quality maintenance and strict training mechanism to ensure the system Long-term, continuous and stable operation.
Over the years, the company has specialized in three-roll gates, swing gates, wing gates, translation gates, speed-pass gates, high-turn gates, barrier-free access, access control, and consumer systems. It has gradually improved the combination of witnesses, face recognition, and magnetic cards. , IC / ID card, bar code, card machine, card machine, ticket machine series of products integrated application, combined with the industry's front-end technology and the rich experience of technical personnel, self-developed design, processing and production of mature and advanced intelligence Channel application system, customized hardware products and software products for customers.

PVC Edge Banding For Cabinet

The main function of the edge banding is to seal the cross-section of the board, so as to avoid the damage of the board and the adverse factors (mainly moisture) in the process of use and prevent the formaldehyde inside the board from volatilizing, and at the same time achieve the effect of beautiful decoration.

The product has the following main features: smooth surface, no blistering, no ribbing, moderate gloss, smooth surface and back surface, uniform thickness, uniform width, reasonable hardness, high elasticity, good quality, strong wear resistance, trimmed and sealed The color of the side and the side is close to the surface color, not whitish, good gloss, and the overall color of the finished furniture is coordinated.

Judge good or bad
1. Look at the hue and surface roughness of the edge banding strip. The color of the surface of a good edge banding strip is also very important. Whether the color is close to the customized product and is gorgeous. If the surface is very rough and there are pull marks, the quality is definitely not much better. This is the surface quality of the edge banding strip. It has nothing to do with the quality of the inner material of the edge banding, mainly the production process of the edge banding factory and the production technical skills of the employees. A good edge banding strip is: the surface must be smooth, no blistering or seldom bubbling, no drawing or few drawing, moderate gloss, not too shiny or too matte (unless there are special requirements).
2. Check the flatness of the surface and bottom of the edge banding and whether the thickness is uniform, otherwise it will cause the joint between the edge band and the board, the glue line is too eye-catching or the gap between the board and the edge band is too large, which will affect the overall beauty. Details determine success or failure, and often a small detail problem may bring an embarrassing situation where the overall effect is not good.
3. Whether the edge trimming is whitish, whether the surface of the bent edge strip is severely whitish, and whether the ground color of the trimming strip is close to the surface color of the board in question. PVC Edge Banding strips are mainly made of PVC and Calcium Carbonate plus additives. If the calcium carbonate content is too high, whitening of the edge banding and bending will occur, which proves that the quality of such products is not good.
4. Whether the strength is okay and whether there is elasticity. High strength means good wear resistance, and the corresponding quality is better. Too high strength also means increased processing difficulty. Low elasticity means low wear resistance and low aging resistance. In addition, according to actual production needs, manual trimming is generally required, and soft spots can be made appropriately, and the automatic edge banding machine can make hard points appropriately.
5. Whether the adhesive is applied evenly and whether it is easy to fall off during use.
6. Smell whether the PVC edge banding strips taste or not. Products produced with good quality raw materials generally have a small taste. If the taste is too large, it means that the quality of the raw materials used in production is relatively poor.

PVC Edge Banding For Cabinet,Pvc Edge Banding,Banding For Cabinet,T Shape Pvc Edge Banding For Kitchen Cabinet

Henan Shunbang Chemical Industry CO.,Ltd , https://www.suspensionpvc.com