"Jinjiuyinshi" is believed to have been heard by everyone. Now is the golden period for buying a car. It is of course an exciting thing to buy a new car. However, the details that everyone pays attention to when buying a car are different. For example, some people pay attention to the appearance, power, and interiors. Other small details are ignored, and others are more attention to detail. Of course, it is a good thing to like to pay attention to details. From the details, we can not only see the intentions of the manufacturers, but also allow us to buy comfortable. So are these "details" in your car beautiful?

1, the reserve lid. The trunk in our impression is generally only used to store items, but it is still an escape route. The decorative effect of the sound-absorbing cotton on the trunk lid is even stronger than its sound-insulating use. Because of the well-wrapped suede felt, not only does our car look more upscale, but it also properly increases the weight of the trunk lid, which can serve two purposes.

2, the hood. Because there are a lot of wires in the engine room, people seem to feel disorderly and affect people's aesthetics. Therefore, many manufacturers will choose to add various covers to the engine compartment when they build cars. This will not only make the engine compartment look more beautiful, but also be easy to handle.

3, hood noise insulation cotton. Not only can reduce the engine noise, but also can prevent the engine cover temperature is too high and cause paint aging. Although there is no problem in using the noise-insulated cotton in the car in a short period of time, the color on the hood may be lighter than the body color after prolonged use.

4, engine compartment noise. If you look closely at the inside of the engine room, work on the joints of each metal surface, and some models will also have sound-insulated insulation cotton fully covered on these metal plates, do not underestimate these materials. Because it can play no small noise and noise insulation effect.

5. Reinforce the top of the shock absorber tower. Many cars are pre-precursor structures, so the front shock absorbers are subject to heavy loads. If there is a reinforcement ring on the top of the shock absorber, not only can the life of the top part of the tower be extended, but after the reinforcement, the resonance at the top of the tower can be greatly suppressed (the thickness of the fastener is determined). In this way, the stability of the vehicle can be improved not only at high speeds, but also at the speed of over-deceleration belts.

These small details mentioned above not only make our car look bigger, but also very practical. So, did you notice it when buying a car?

Rain water gutter cold Roll Forming Machine is the special equipment for continuous rolling and cold-forming on steel sheet. It adopts coiling steel sheet as the raw material, decoiling the coil, continuous rolling and cold-forming, automatically cut to the size and output the finished pane. Working flow Manual decoiler --- Feeding table --- Roll forming machine --- PLC system --- Hydraulic system --- Out of table

Gutter Roll Forming Machine

Gutter Roll Forming Machine,Roofing Gutter Roll Forming Machine,Aluminium Rain Gutter Roll Forming Machine,Cap Gutter Roll Forming Machine

CANGZHOU DIXIN ROLL FORMING MACHINE CO.LTD , https://www.dxywj.com