Sintered Friction Button for Heavy Duty Trucks, Right Diagonal Holes (FYDL)
Company main products:
2.Molded graphite block
3.Graphite rod
4.Graphite tube
5.Graphite plate
7.Graphite crucible
Customized High Pure and density graphite products/graphite block for EDM
Edm Graphite,Graphite Block For Edm,Edm Graphite Electrodes,Isostatic Graphite Column CARBONS TECH&CREATION(HENAN) INDUSTRY CO.,LTD , https://www.moldedgraphite.com
1, Dimension: 77X69mm, 2 right diagonal holes;
2, Thickness: 4.0mm-. 8mm; Rivet holes: 12.8mm;
3, Both smooth and rough surface available.
Our clutch button products are suitable for Mack and Tata clutch disc, Leyland tractor clutch disc and some cars, due to the low wearing rate, suitable friction coefficient and the proper hardness, clutch buttons products is replacing part of the clutch facing market, especially in the heavy duty truck market, customers who are using our buttons found it was very economical, as our button is low wear rate, and can compare with the US made clutch button.
We have three clutch button formula currently, one is our regular formula, smooth finish and medium property, another is the low wear formula with rough finish, the third one is a new formula, it's developed with the assistance of the oversea engineer, and this button is following Miba appearance and similar to its finish and property, it is supplied to our OE customers, due to its low cost and excellent property, it is very popular among our customers from South America and India.
One of our formula, the property as follows:
1) Friction coefficient: 0.49-0.58(regular)
Wearing rate: 0.05-0.18(regular).
2) Surface Hardness of button: BHN 25+/-5.
3) Bend test result: Passed, no bearing area on the back plate.
Our isostatic graphite and Molded Graphite were tested at the National Electrical Carbon Products Quality Supervision and Inspection Center. The main physical and chemical performance index as follows: the compressive strength--125 mpa, shore hardness -- 65 degrees, resistivity --12 mu Ω m. At the same time, the 10μm,8μm,6μm,4μm products have already began Large-scale production,.and unanimously acknowledged by customers. The 2μm,1μm graphite products are under trial. Our company high quality of isostatic pressing special graphite yield above 90%, far ahead of industry the yield of 70%, the first in the country.