(1) Sorting machine structure A China DCY type sorting machine This machine is developed by China Changchun Institute of Geology. It is divided into DCY-1 type and DCY-2 type. Electromagnet consists of three parts, the sorting channels and DC power supply components.
The electromagnet includes a magnetic pole and a magnetic circuit. The magnetic pole portion is designed to have an equal magnetic force and a linear relationship between magnetic force and r. The former is called an equal magnetic pole and the latter is called a linear force pole.
The sorting trough body is made of plexiglass, its shape is consistent with the magnetic pole gap, and the material for feeding and discharging is adjustable. The separation tank structure and the separation of the ore particles in the separation tank are shown in Figures 1 and 2.

The DC regulator uses transistor voltage regulation. [next]
B Foreign magnetic fluid sorting machine

Japanese magnetic separation using a magnetic fluid hydrostatic nonmagnetic metal made of a schematic sorting mechanism, FIG 3, FIG. It uses a pair of permanent magnetic poles to generate a magnetic field. The magnetic field strength is 220-260kA/m, the magnetic pole angle is 30°, and the symmetry axis of the magnetic pole is inclined by 15° to the vertical axis. It is characterized in that the weight of the material fed to the feed end passes through the magnetic pole to the gap space, and the weight is automatically sunk into the magnetic pole. In the sink box at the lower part of the opening, the light object is pressed by the material feeding material, and passes through the magnetic pole to enter the floating box along the oblique direction of the density line (Fig. 4).

(II) Application example A Diamond selection The test samples were taken from the Mengyin diamond mine in Shandong, China. The ore size is 0.2-0.5 mm, and the ore is first subjected to froth flotation, and the diamond is floated into a flotation concentrate having a yield of about several thousandths. This concentrate was subjected to a first magnetic separation (using a double-disc magnetic separator with a magnetic field strength of H = 1000 kA/m) to remove approximately 80% of the magnetic minerals. The non-magnetic part is sorted by two magnetic fluids to obtain a concentrate with a yield of about 5%, and then enters the second magnetic separation operation. The obtained non-magnetic part is then subjected to magnetic fluid separation to obtain a diamond concentrate, which has a purity of 95%.
Natural diamond is easily incorporated into magnetic products due to surface contamination and intrusion of magnetic impurities into the fine cracks on the surface. Therefore, the first magnetically selected non-magnetic products (actually non-magnetic and weakly magnetic products) are boiled for 30 minutes, then Enter the following operation, otherwise, a small amount of weak magnetic diamond will be discharged into the magnetic tailings in the second magnetic selection.
B is selected from gold USSR AH Berlinski (BepДИHckИЙ) magnetic fluid medium is selected from gold study of rare earth salt solution mirror, terbium and the like. The magnetic pole gap used: the lower width is 8 mm, the upper width is 75 mm, the magnetic field strength is 7500 and 8000 kA/m, respectively, and the +0.5 mm gold-bearing gold ore is selected to make the gold grade from 300 to 600 kg/ The ton is increased to 18-74 kg/ton, and the recovery rate is 07.5-98.5%.

CNC Saw Blade Pipe Cutting Machine

1. Servo motor-driven feeding system: AC servo motor/C5 ball screw and linear guide are adopted, which are fast, stable and accurate. The maximum feed speed of the Saw Blade cutting machine is 1500mm/s.
2. Chittak's unique patent: large pipe clamp device, which reduces the vibration of the pipe during operation, prolongs the life of the saw blade, and ensures the feeding speed. Patent number: ZL 2009 1 0039079.8
3. The minimum tail length of saw blade cutting is 20-30mm.
4. The control system is developed by Chittak, the database is rich and can be updated. easy to use.
5. Equipped with automatic detection and alarm information system, which is convenient for users to troubleshoot.
6. Five different cutting lengths can be set for a single material to reduce the waste of excess material.
7. The model can update the automatic feeding system, which greatly improves the efficiency and saves labor costs. At the same time, it can be equipped with a conveyor belt to transport the finished product to the next process. All updated functions can be controlled by the cutting machine system.