• Type: Pipe Spool Fabrication
• Rotaion Speed: 0.15-1.5rpm
• Tilting Angle: 0-90°
• Welding Tilter Type: Traditional Special
• Purpose: Pipe Spool Fabrication
• Trademark: youbest
• Specification: customized
• HS Code: 85153900

• Structure: Platform
• Max Eccentricity Distance: 250mm
• Voltage: 380V
• Condition: New
• Function: Fitting-up and Welding Pipe with Flange
• Transport Package: Container
• Origin: China

Pipe fitting up station includes two units of roller supporter for locating the pipe, one unit of headstock for locating flange, and one unit of fitting platform for locating the elbow, tee and reducer. The roller supporter can move on rail by manual.

It is suitable for pipe to flange, elbow, tee etc.

The headstock can move forward and back forward on rail, up and down by manual or motor.
The fitting platform can move forward and back forward on rail, up and down, and left and right by manual too. Reducer will be considered for heavy duty application which will make the pipe to fitting fit-up much easier. 


Fitting up machine specifications

• Suitable pipe: OD: 2-80"
• Suitable for pipe length: 1500~6000mm with two roller support;
• Max. payload: 10000kg;

Product Features
1) Fast and multifunction fitting up fixture to content the fit-up requirement between the fitting and pipe;
2) The fixture uses mechanical transmission to adjust the position of fittings toward up/down or right/left to make operators fit up easily;
3) The gaps of fitting up are realized by baffle plates. Trough choosing different sizes of battle plates, it can meet different requirements of gaps to guaranteed the gap precision;
4) The fit-up system also can be used in manual root welding.

1.Independent electric screw drive brings you both plasticization and energy efficiency
2.Brand new BECKHOFF centrailized control system special designed for  PET production.
3.Three station post cooling robot makes the preform perfectly cooled with better cycle time.
4.advanced proportional valve control technology makes the fast and precise clamping possible.
5.the hydraulic system was driven by a servo motor whick ensure the lower energy consumption and sufficient hydraulic power supply.
6.with the advanced pressure hold technology ,the system makes the plasticization and pressure hold at the same time therefore has a better cycle time for production .
7.special design for PET Preform Mould,which ensure the fast clamping movement and uniformly forced of the mould.

Injection Molding Machine

Injection Molding Machine,Pet Preform Injection System,Fully Servo Pet Preform Injection Machine,Hight Speed Preform Injection Machine

Demark(changxing)injection system CO. LTD , https://www.petplas.com