On July 1st, the implementation of the implementation of a one-year delayed implementation of the Light-Caliber III policy below 3.5 tons has already expired, which means that the light-duty truck has fully implemented the State III emission standard. Analysts believe that after one year's operation, manufacturers have a stronger ability to respond to the national III emission policy, coupled with the subsidy for cars to the countryside and the implementation of trade-in policy, has played a huge role in the sales of light trucks, so the implementation of the country III The impact benefits will be greatly reduced.

At present, the sales volume of light trucks in China is more than 1 million units a year, which accounts for nearly half of the total commercial vehicle sales and plays a decisive role. According to statistics from the China Association of Automobile Manufacturers, sales of passenger cars increased by 21.20% in the first five months of this year, but commercial vehicles dropped by 1.56%. In the segments of commercial vehicles, light trucks maintained double digits. The growth can be described as supporting the overall situation of commercial vehicles. The sales of light trucks in the first five months of the major light truck manufacturers Fukuda increased by 14.1%, while the growth rate of JAC light trucks was close to 20%.

For LIUGONG Cylinder Seal Kit

Precautions for daily maintenance of hydraulic cylinders
1. Regularly inspect the sealing components of the hydraulic cylinder, such as O-rings and gaskets, to ensure that they are intact and undamaged. If there is wear or aging, they should be replaced in a timely manner.
2. Regularly check the liquid level of the hydraulic cylinder and keep it within the specified range. If the liquid level is too low, add hydraulic oil in a timely manner.
3. Regularly inspect the connection parts of the hydraulic cylinder, such as oil pipes and joints, to ensure their tightness and reliability. If there is any looseness, it should be tightened in a timely manner.
4. Regularly clean the outer surface of the hydraulic cylinder to prevent dust, sand, and other debris from entering the interior of the cylinder and affecting its normal operation.
5. Regularly inspect the surface of the piston rod of the hydraulic cylinder, and promptly repair or replace it if there are scratches or wear.
6. Regularly inspect the hydraulic system of the hydraulic cylinder, and promptly handle any problems such as oil leakage or unstable pressure.
7. When the hydraulic cylinder is not in use for a long time, its hydraulic oil should be drained to avoid oil aging, deterioration, and affecting the normal operation of the hydraulic system.
8. When repairing or replacing hydraulic cylinders, attention should be paid to safety to avoid sudden movement or pressure release of the hydraulic cylinder, which may cause personal injury or equipment damage.

For Liugong Cylinder Seal Kit,For Liugong Swing Motor Seal Kit,Center Joint Seal Kit For Liugong,Center Joint Seal Kit Liugong

Safe Seal Technology Co., Ltd. , https://www.jssafeseal.com