ISO 6431 DNC Series Pneumatic Cylinder
WNS series horizontal internal combustion boiler is classic 3-pass wetback oil/gas fired boiler. After fuel is atomized by burner, flame is full of the wave furnace and transfer heat via furnace wall, called 1st pass; the high temperature flue gasses are collected in reversal chamber and then enter 2nd pass, which is grooved tube bundle area through heat convection, air temperature gradually falls and flows to front smoke box and enter 3rd pass, which is done in the smooth tube bundle area, and then through back smoke box lead to chimney and exhausted to the atmosphere. WUXI ZOZEN BOILERS CO.,LTD. , https://www.cnzozen.com
Part Name(Material)
1. Front cover (Aluminum alloy)
2. Back cover (Aluminum alloy)
3. Piston (Aluminum alloy)
4. Piston rod (S45C hard chrome carbon steel) Assembly kits didn't include this parts
5. Barrel (Hard anodized aluminum) Assembly kits didn't include this parts
6. Front cover seal(PUR)
7. Cushion seal(NBR)
8. Piston rod O-ring(NBR)
9. Cover o-ring (NBR)
10. Piston seal (NBR)
11. Wear ring (PA66)
12. Self lubricating bearing (PTFE+Brass)
13. Magnet (RbFeb) Optional
14. Cushion needle (Brass)
15. Hexagon screw (Carbon steel)
16. Nut (Carbon steel)
17. Profile bolt (Carbon steel)
Remark: DNC series assembly kits include front, back cover, piston and seal kits
Not include barrel and piston rod.
If you want buy barrel and piston rod, you can buy them separately form us.
We also can supply the following cylinder assembly kits to you:
1.DNG cylinder assembly kits (ISO 15552)
2.SI cylinder assembly kits (ISO 6431)
3.SC cylinder assembly kits (ISO 6430)
4.MA mini cylinder assembly kits (ISO 6432)
5.MA mini cylinder assembly kits
6.MAL mini cylinder assembly kits
7.SDA thin compact cylinder assembly kits
8.ADVU compact cylinder assembly kits (ISO 6431)
9.MB cylinder assembly kits
We can offer DNC cylinder and cylinder kits, our nice price and reliable quality will be your first selection.
Part Name(Material)
1. Front cover (Aluminum alloy)
2. Back cover (Aluminum alloy)
3. Piston (Aluminum alloy)
4. Piston rod (S45C hard chrome carbon steel) Assembly kits didn't include this parts
5. Barrel (Hard anodized aluminum) Assembly kits didn't include this parts
6. Front cover seal(PUR)
7. Cushion seal(NBR)
8. Piston rod O-ring(NBR)
9. Cover o-ring (NBR)
10. Piston seal (NBR)
11. Wear ring (PA66)
12. Self lubricating bearing (PTFE+Brass)
13. Magnet (RbFeb) Optional
14. Cushion needle (Brass)
15. Hexagon screw (Carbon steel)
16. Nut (Carbon steel)
17. Profile bolt (Carbon steel)
Remark: DNC series assembly kits include front, back cover, piston and seal kits
Not include barrel and piston rod.
If you want buy barrel and piston rod, you can buy them separately form us.
We also can supply the following cylinder assembly kits to you:
1.DNG cylinder assembly kits (ISO 15552)
2.SI cylinder assembly kits (ISO 6431)
3.SC cylinder assembly kits (ISO 6430)
4.MA mini cylinder assembly kits (ISO 6432)
5.MA mini cylinder assembly kits
6.MAL mini cylinder assembly kits
7.SDA thin compact cylinder assembly kits
8.ADVU compact cylinder assembly kits (ISO 6431)
9.MB cylinder assembly kits