High Quanlity Brass Radiator Automatic Air Vent Valve (IC-3001)

Model NO.: IC-3001
Trademark: ITALY
Specification: 1/2"
Origin: Zhejiang. China
HS Code: 8481804090
                 High quanlity brass radiator Automatic Air Vent Valve (IC-3001)

Specification Of Product

Size  : 
 1/2 inch to 1 inch
pressure :   1.6MPa
Working Temperature:    0° C≤ T≤ 100° C
  brass according to customer requirements, the GeneralHPB57-3 HPB58-3 HPB59-3 DZR cw617n CW614N
Surface treatment 
 brass, nickel plated or chrome
  When the system has a gas overflow, gas along the pipe up, eventually gathered at the highest point of the system, and the exhaust valve is generally installed in the system, when the gas into the vent valve cavity gathered in the upper portion of the exhaust valve, with the increasing of the gas inside the valve, pressure rise, when gas pressure is greater than the system pressure, the gas can make the cavity of the water drops, buoy with water level drops, open the vent; Gas, after the water level rise, buoy also rose, close the vent
Applications    Exhaust valve is applied to the independent heating system, central heating system, heating boiler furnace, central air conditioning, floor heating, solar heating system pipe exhaust, etc
 1,Not cause difficulties buoy activity.
 2.Will have rust in the long run, which leads to the system could not work and leaking.
 3,Lever part of seal face is to use spring support, and can leverage the movement of the corresponding expansion, guarantee in the case of no exhaust sealing.
Pack:Standard packing:Plastic bag, inner box, carton
Follow Customized Pack design

BRASS 1/2"
Polishing  Golden
THREAD BRASS-ISO228     Delivery time :Samples  :Within 20days after drawing confirmed
Mass produce time:Within 30days after deposit
Seal NBR NBR  

Pictures of high quanlity radiator brass Automatic Air Vent Valve:
High Quanlity Brass Radiator Automatic Air Vent Valve (IC-3001)

High Quanlity Brass Radiator Automatic Air Vent Valve (IC-3001)
Our factory:

High Quanlity Brass Radiator Automatic Air Vent Valve (IC-3001)

Our Services
1) we can make the samples according to customer's samples or designs.
2) Our designer team can finish the samples timely, the exact sample delivery time depends on thesample's style, usually in 15 working days.
3) For New design samples, the buyers have to pay for the relative model fee.(When your order reach a certain amount, we will return back the model fee to you.

Price Terms:

Payment Terms:
1) T/T, 30% T/T deposit before production, pay the balance before shipment.
2) L/C at sight (for large quantity order)
3) 100% T/T in advance

Order and Mass Production:
1) We will send PROFORMA INVOICE to you when the order is confirmed.
2)  We will start to have mass production when confirm our sample and 30% T/T deposit received.
3)  Quality is under the control and supervision during the production.
4)  Packing information will be confirmed before the production finished, If no special requirment, using our normal package.

Quality control and inspection:
1)  Will be check by QC when Material & accessories inspection up arrival
2)  In line control on Each Step
3)  Every one valve will be comprehensive review before packing
4) Sales will be spot check before shipping
5)  Third Party inspection Such as CE, SABS and so on
6)  Original authorization through ISO9001:2008

O-ring mechanical seals

Mechanical Seal,Aesseal T03D,Shaft Seal

Longshen Seal Manufacture (Wuhan) Co., Ltd , http://www.topstarseal.com