14 months warranty, good after service, delivery on time
For more details, please feel free to contact me!
Features: 1.The real test in our laboraroy that show to us the horn can get 110db at least. 2.Super long surround sound,it make the sound powerful and comfortable so that decrease the trafficaccident. 3.We used the imported high quality manganese steel to make the soundboad so that can make the fullest possible "BABA~~" sound. 4.We use the most advanced Teflon coat technology.I can be dust-proof and water-proof effectively(We must inform you that there are not have any horn factory can make a universal horn that all waterproof).It prolong the lifetime of the horn effectively. 5.We used the 100%ABS material to make the horn bulb.It has very good Heat resistance,impact resistance,anti-corrosion so that can prevent the dinas and the heat of the engine damage for the horn.Anyway,it also has high hardness characteristic.It can drop from 1 meter that is not easy to break.
What should I note when I am Installing and using? a. Snail down or 45 degree Angle installation, Prevent water  into coiled directly b. If you are not special peason , dont change the angle degree of Steel Support,or it will change the Original air gap c. mounting torque of Steel support is between 6Nm to 11Nm. d. The horn support should be mounted to Solid surface to avoid resonance. e. In order to avoid contact with other parts of the car,The horn should be connected with horn support and installed to wide and Ventilated place. f. Nonpolarity requirements for this product, the connected place of the wire should solid enough, Double horn should installed on solid part of car body in parallel way. g. Keep away from car motor and much Radiation place. Not be too low mounting. h. Don't keep the horn on for 60 seconds, or it will lead to the coil burned down. i. Using copper wire, more than 1.5mm for wire Diameter, the wire length should less than 4m. j. Standard mounting Voltage, input working current more than 30A,12V horn voltage: 9-14.5V Â
Our company is a professional manufacturer and exporter that is concerned with the design , development and production of auto parts , we are fully committed to producing technologically advanced auto parts.
Factory show: Certifications:
Exhibition:
Contact us: Guangzhou Jindong Electronic Technology Co.,LTD Add: No.1,Gudong Industrial Zone,Gulong Road,ShawanTownship,Panyu District,Guangzhou  Benki Huang  Tel:+86-020-34738085                                  Mob:+86-13922729780   Fax:+86-020-84737552                                               Â
Product show:
Technical parameter:
Details
  Snail Horn
Voltage: (V)
12
Current: (A)
≤4A
Frequency: (Hz)
H=500±30   L=400±30
Sound level: (DB)
105dB-118dB
Diameter: (mm)
ø80
Applicable for cars
Dedicated
Certified
ISO/TS16949
Remarks: 1. It can be designed with other cars exclusive 2. It is very popular in America, Middle East and Europe (best quality)
3.It's our best quality car horn.It has at least twice life time than ordinary horn(Patent).
14 months warranty, good after service, delivery on time
For more details, please feel free to contact me!
Features: 1.The real test in our laboraroy that show to us the horn can get 110db at least. 2.Super long surround sound,it make the sound powerful and comfortable so that decrease the trafficaccident. 3.We used the imported high quality manganese steel to make the soundboad so that can make the fullest possible "BABA~~" sound. 4.We use the most advanced Teflon coat technology.I can be dust-proof and water-proof effectively(We must inform you that there are not have any horn factory can make a universal horn that all waterproof).It prolong the lifetime of the horn effectively. 5.We used the 100%ABS material to make the horn bulb.It has very good Heat resistance,impact resistance,anti-corrosion so that can prevent the dinas and the heat of the engine damage for the horn.Anyway,it also has high hardness characteristic.It can drop from 1 meter that is not easy to break.
What should I note when I am Installing and using? a. Snail down or 45 degree Angle installation, Prevent water  into coiled directly b. If you are not special peason , dont change the angle degree of Steel Support,or it will change the Original air gap c. mounting torque of Steel support is between 6Nm to 11Nm. d. The horn support should be mounted to Solid surface to avoid resonance. e. In order to avoid contact with other parts of the car,The horn should be connected with horn support and installed to wide and Ventilated place. f. Nonpolarity requirements for this product, the connected place of the wire should solid enough, Double horn should installed on solid part of car body in parallel way. g. Keep away from car motor and much Radiation place. Not be too low mounting. h. Don't keep the horn on for 60 seconds, or it will lead to the coil burned down. i. Using copper wire, more than 1.5mm for wire Diameter, the wire length should less than 4m. j. Standard mounting Voltage, input working current more than 30A,12V horn voltage: 9-14.5V Â
Our company is a professional manufacturer and exporter that is concerned with the design , development and production of auto parts , we are fully committed to producing technologically advanced auto parts.
Factory show: Certifications:
Exhibition:
Contact us: Guangzhou Jindong Electronic Technology Co.,LTD Add: No.1,Gudong Industrial Zone,Gulong Road,ShawanTownship,Panyu District,Guangzhou  Benki Huang  Tel:+86-020-34738085                                  Mob:+86-13922729780   Fax:+86-020-84737552                                               Â
A Heat Exchanger Unit is a device used to transfer thermal energy (heat) between two or more fluids. Heat exchangers are used in a wide variety of applications, such as heating and cooling of buildings, industrial processes, and power generation.
The heat exchanger unit essentially consists of heat exchangers such as Plate Heat Exchanger, Shell and Plate Heat Exchanger, or other counterpart, a circulating pump, a fluid make-up pump, thermometers, a filter, sensors, a pipeline and valves. It is also possible to design a temperature control system, pressure stabilization system, variable-frequency controller, heat metering and communication controller, etc. according to the client`s requirements.
Big advantage of heat exchanger unit is that, by adopting a modularized structure, it maximizes each component`s function to the most. The precise control for heat exchange process also saves time and efforts for maintenance and installation.
Feature is that intelligent control, excellently energy-saving, high automation and easy to operate, high cost performance and wide application.
Heat Exchanger Unit,Heat Exchanger Ac Unit,Heat Exchanger Package Unit,Heat Recovery Ventilation Unit
