Model NO.: shutter door forming machine
Trademark: Haoshuo
Transport Package: Nude Packing
Specification: 37, 42, 55, 65, 77, 90, 98
Origin: China
HS Code: 84552290
Low price Foaming Aluminum Shutter Door Forming Machine, cutting machine
Composition:
| 1 |
Decoiler |
1 set |
| 2 |
Guide Feeding device |
1 set |
| 3 |
main  forming machine |
1 set |
| 4 |
Foaming machine (just foamed one owned) |
1 set |
| 5 |
Straighten device |
1 set |
| 6 |
Punching device |
1 set |
| 7 |
flying saw cutting machine |
1 set |
| 8 |
finished products table |
1 set |
| 9 |
PLC control system  PLC |
1 set |
| 10 |
Spare Parts And Tools |
1 set |
Main Parameters:
| molding number of tracks |
46 |
| size of mainframe |
23 meter |
| principal diameter of axle |
Ф40mm |
| roll meterial |
40Cr,surface hard chromium plating |
| motor power(AC speed control) |
7.5kw |
| kind of drive |
Up and down the gearbox shaft drive |
| molding speed |
8~15m/min |
| mounting dimension |
32m XÂ 1.5m XÂ 1m |
| control cabinet |
PLC |
FAQ:
1) Q: Are you manufacturer or trading company?
A: We are manufacturer and trading company .
Â
2) Q: Do you provide installing and training overseas?
A: Overseas machine install and worker training services are optional.
Â
3) Q: How is your after sales support?Â
A: We provide technical support on line as well as overseas services by skillful technicians.Â
Â
4) Q: How does your factory do regarding quality control?Â
A: There is no tolerance regarding quality control. Quality control complies with ISO9001. Every machine has to past testing running before it's packed for shipment.
Â
5) How can IÂ trust you that machines pasted testing running before shipping?
A:Â Â 1) We record the testing video for your reference. Or,
    2) We welcome your visit us and test machine by yourself in our factory.
Â
6) Q: Do you sell only standard machines?
A: No. Most machines are made to order.
Â
7) Q: Will you deliver the right goods as ordered? How can IÂ trust you?
A: Yes, we will. We are Gold supplier of Made-in-China with SGS assessment (Audit report can be provided).Â
Contact us:
Â
Tel: +86 151 5222 5198
Â
Â
Â
Anti-wear Ring
Installation and precautions of track connecting rod oil seal
The installation steps for the track link oil seal are as follows:
1. Cleaning: Clean the connecting parts to ensure that the surface is flat, clean, and free of grease and dirt.
2. Oil application: Apply a layer of lubricating oil to the connecting parts for better installation.
3. Installation: Gently push the oil seal into the connection area to ensure that the lip of the oil seal is not damaged.
4. Positioning: After positioning the oil seal, press it with your fingers to ensure it is in the correct position.
5. Inspection: Check if the oil seal is installed correctly and ensure that the lip is not damaged.
The precautions are as follows:
Before installation, check if the oil seal is damaged. If the oil seal is damaged, replace it with a new one.
Before installation, ensure that the surface of the connecting parts is flat, clean, and free of grease and dirt.
3. When installing the oil seal, gently push in to avoid damaging the lip of the oil seal.
4. After installation, check whether the oil seal is installed correctly to ensure that the lip is not damaged.
5. During use, the condition of the oil seal should be regularly checked. If any damage or wear is found, the oil seal should be replaced in a timely manner.
Wear ring for excavator,For excavator track,For excavator accessories
Safe Seal Technology Co., Ltd. , https://www.jsspreals.com