The ultra-low frequency high voltage generator is a high voltage test device for ultra-low frequency AC withstand voltage test. This device is suitable for the insulation withstand voltage test of polyethylene, cross-linked polyethylene plastic cables and other high-voltage electrical equipment on the spot by the power sector and industrial and mining enterprises. The device is less destructive than the DC withstand voltage test and is equivalent to AC power frequency withstand voltage.
　 Ultra-low frequency high voltage generator product features
1, ultra-low frequency using the latest frequency conversion technology, resulting in ultra-low frequency signal high output power.
2, ultra-low frequency high voltage generator has a small size, light weight, easy to carry.
3, ultra-low frequency high voltage generator with power over-current, high-pressure over-current, tank overheating and other protection.
4. Ultra-low frequency is set with FM output function, and its output frequency can be adjusted to 0.1, 0.05 and 0.02HZ, respectively.
5, ultra-low frequency instrument to adapt to different specifications of the cable and electrical equipment high pressure test needs.
Ultra-low frequency generator technology parameters 1, ultra-low frequency generator input voltage: 220V±10%50HZ±1%
2, ultra-low frequency environment temperature: 0 ~ 40 °C
3, ultra-low frequency generator relative humidity: 90%
4, ultra-low frequency generator output voltage: 0 ~ 40KV0 ~ 70KV
5, ultra-low frequency generator output frequency and load capacity: 0.1HZ 1.1μF 0.05HZ 2.2μF0.02HZ 5.5μF
6, the accuracy of ultra-low frequency high voltage generator voltmeter: 3%
7, ultra-low frequency high voltage generator current meter accuracy: 5%
Dear Customer:
Thank you for your attention to our products. In addition to this product introduction, our company also introduces the vacuum tester, infrared thermometer, dielectric loss tester, high voltage test transformer, vacuum oil filter, high current generator, etc. If you are interested in our products, welcome to inquire. Thank you!
DSA-2 Spinning Reel Series
DSA-2 Spinning Reel Series
5.2:1 or 6.2:1high speed gear system Stainless
steel Screw-in Handle for easy installation and removal
|
Front drag
|
|
Thick bail arm
|
|
Super strong drive gear
|
|
Hight intensity graphite material
|
|
Micro-adjusting drag system
|
|
Excellent line lay osciallation system
|
|
one-way clutch ball bearing
|
|
gear ratio of 5.2:1 or 6.2:1 is available
|
|
Screw-in handle
|
|
|
Gear Ratio
|
5.2:1
6.2:1
|
|
Bearings
|
3+1
12+1
|
|
ITEM
|
Gear Ratio
|
Ball Bearing
|
Line Capacity(mm/m;Lbs/yds)-Standard
|
Line Capacity(mm/m)-Shwallow
|
OWC
|
|
DSA1000
|
5.2:1
|
3+1BB-10+1BB
|
0.18/205 0.20/170 0.25/100; 4/175 6/110 8/90
|
0.12/150
|
Y
|
|
DSA2000
|
6.2:1/5.2:1
|
3+1BB-10+1BB
|
0.20/245 0.23/180 0.28/115; 4/240 6/160 8/125
|
0.20/150
|
Y
|
|
DSA3000
|
6.2:1/5.2:1
|
3+1BB-10+1BB
|
0.28/155 0.31/125 0.36/95; 8/180 10/150 12/110
|
0.22/150
|
Y
|
|
DSA4000
|
6.2:1/5.2:1
|
3+1BB-10+1BB
|
0.28/225 0.31/180 0.36/135; 8/270 10/220 12/160
|
0.24/150
|
Y
|
Dsa-2 Spinning Reel Series,Reel Fish Mats,Automatic Fishing Reel,Telescopic Fishing Rod And Reel
CIXI DONGSHANG FISHING TACKLE CO.,LTD. , https://www.dongshangreels.com