Car sales need to change thinking

Car sales need to change thinking Compared with the growth rate of the Chinese economy, the growth rate of the Chinese automobile market should be much more dazzling. According to statistics from the China Automobile Association, in the first six months of 2013, the sales volume of this market reached 10,782,000 units, which represented a year-on-year increase of 12.3%, which was nearly 5 percentage points higher than the GDP growth rate. Among them, the sales of the passenger car market was 8.6511 million, an increase of 13.81% year-on-year, which was 6.21 percentage points higher than the GDP growth rate. If you read the Chinese economy from the automotive industry, it does not seem to be a problem. Because, in the world's major auto market, there are only two digits of growth in China.

According to the information released by various vehicle manufacturers, the production capacity of Chinese automobiles in 2013 was between 35 million and 38 million; by 2015, this figure would have been between 45 and 48 million; around 2016, China The car's production capacity will exceed 50 million. According to the statistics released by the World Automobile Manufacturers Organization, in 2012, the world's automobile production was 84.1 million. In other words, from a production perspective, China produces more than 60% of the world's cars.

In the ever-expanding production capacity and repeated planning, the Chinese auto industry will undergo a pattern change. Analysts from the U.S. automotive industry joked that it is best to test the predictive power of forecasters and let them predict the capacity of the Chinese auto market.

Compared with the changes that will be started or already started by the vehicle manufacturers, the distributors at the sales terminal are already at the center of this transformation. The situation of the dealer groups is not consistent with the capacity planning of the Chinese auto market.

Compared with the growth rate of the Chinese economy, the growth rate of the Chinese automobile market should be much more dazzling. According to statistics from the China Automobile Association, in the first six months of 2013, the sales volume of this market reached 10,782,000 units, which represented a year-on-year increase of 12.3%, which was nearly 5 percentage points higher than the GDP growth rate. Among them, the sales of the passenger car market was 8.6511 million, an increase of 13.81% year-on-year, which was 6.21 percentage points higher than the GDP growth rate. If you read the Chinese economy from the automotive industry, it does not seem to be a problem. Because, in the world's major auto market, there are only two digits of growth in China.

According to the information released by various vehicle manufacturers, the production capacity of Chinese automobiles in 2013 was between 35 million and 38 million; by 2015, this figure would have been between 45 and 48 million; around 2016, China The car's production capacity will exceed 50 million. According to the statistics released by the World Automobile Manufacturers Organization, in 2012, the world's automobile production was 84.1 million. In other words, from a production perspective, China produces more than 60% of the world's cars.

In the ever-expanding production capacity and repeated planning, the Chinese auto industry will undergo a pattern change. Analysts from the U.S. automotive industry joked that it is best to test the predictive power of forecasters and let them predict the capacity of the Chinese auto market.

Compared with the changes that will be started or already started by the vehicle manufacturers, the distributors at the sales terminal are already at the center of this transformation. The situation of the dealer groups is not consistent with the capacity planning of the Chinese auto market.

As the consumption area of ​​the Chinese auto market changes, the profit sources of dealers will inevitably bring about changes. It is too early to draw conclusions about what the transfer of such gold rushing locations has brought to Chinese car dealers. However, it can be predicted that in the process of gradual expansion of China's auto consumption market, there will be more and more capital added to the auto sales field, and the annual increase rate of Chinese auto dealers is estimated to be 2,500-3,000.

Rigid PP/PE/ABS/PC Pelletizing Machine

Rigid PP/PE/ABS/PC Pelletizing Machine

raw material:PE plastic film

final product: PE granules

output:100-800kg/h

cutting type:water ring

Components included in plastic pelletizing machine :

1.feeding conveyor 2. film compacting machine 3. screw barrel 4.fast speed double post non-stop hydraulic screen changer 5. water flush pelletizing system 6. water cooling trough 7.Centrifugal dewatering machine 8.vibration screen 9. conveying blower 10. store silo

Advantages of this plastic pelletizing machine :

PE/PP recycling granulating machine is special equipment for the PE PP film recycling granulating, it equipped with comacting machine which cound pre- compact the film into smaller granules, then easily feed into screw barrel of extruder, its efficiency is high and can improve production capacity and save labour cost.

it has two vacuum exhuasting mouth on extruder barrel which can fully vent the moisture in the material and hence the final granule quality will be very perfect.

at the end of screw barrel, it equipped with double post fast speed hydraulic non -stop screen changer which can effetively filt out the dirty in the plastic melt.

the pelletizing adopts water flush pelletizing which is easier to operate, and the shape and appearance of granule is good.

Rigid Pp/Pe/Abs/Pc Pelletizing Machine,abs granules Machine,pp pe pelletizing line,abs pellets extruder

zhangjiagang sevenstars machinery co.,ltd , https://www.zjgsevenstarsmachinery.com