Auto Electric Welded Wire Mesh Machine For Roll Mesh




This machine makes mesh used to make construction mesh, wall mesh, animal cage, mining etc.
Machine Description
1 The longitude wire and cross wire are fed from wire coils automatically. Longitude wire :Wire rolling machine+Bobbin stand-off with rollers (0.65-1.2mm) Iron wire pay-off (1-2.5mm).Cross wire:wire pay-off
2 The cross wire are pre-straightened &pre-cut.
3 The middle knife can cut the mesh into 2 mesh if width enough.The side knife will cut the extra cross wire out of side.
4 The thorn shaft(above big shaft) is to fix the mesh.
5 The little shaft is to keep the tensity of mesh.
6 In front of machine on the right is control cabinet.It can adjust speed.
7There are transformer,motor,reducer on the backside of machine.
8 The raw material can be low-carbon steel wire (black wire) and galvanized wire.
9 We will use Schneider electric components, Delta inverter in the electric control cabinet.
We will use the best quality main motor&reducer, it will be equipped with inverter.
10 The middle cutter and sider cutters can be adjusted randomly to make two mesh rolls at same time.The mesh roll length can be set by counter switch on the control panel.
11 The welding transformers have 8 degrees and can be adjusted for different wire diameters.The welding time and welding current can be adjusted on the control panel to adjust the welding degree.
Advantage
1 easy operated
2 high production
3 advanced technology electronics.
4.Separate control technology, make welding transformers working separately to reduce needed capacity.
5.Different position of button and control box with inverter (Taiwan Delta), not easily broken like before, easier to operate.
6.Sealed welding transformers, it has 8 degrees, can be adjusted for different wire diameters.
7.Square steel bottom instead of angle iron bottom. 1.5mm steel plate instead of 0.2-0.3mm steel plate, more stable.
Technical parameter

Detailed Information


Auxiliary Equipment


Load

Factory
Hebei Jiake Welding Co ltd have an experience on designing and manufacturing wire mesh machine for more than 10 years.Our welded wire mesh machines have exported to more than 90 countries and regions over the world.Welcome to visit our factory and have more deeply cooperation..
Service


Contact us



Delivery Time
30 days from received your payment in advance

Shipping
1.Main machine and auxiliary machine are in plastic package in container, steel rope will use to fix the machine if by train.
2. Spare parts are in wooden box.

High-strength Screws

Eye Bolts Screw,High-Strength Screws,Anchor Eye Screws,Steel Forged Screws

Wuxi Sixleaf Machinery Co. LTD , https://www.sixleafmachine.com