AlphaLiner: Global idle container ships show an upward trend
Machining Plastic has a small density, light weight, can be insulated. machining Plastic is the use of CNC machining out, including drilling. Cutting, turning, machining Plastic commonly used products are: PA PC, Tetlon POM, PMMA. , we have a special inspection room to test the products, to ensure that and each size in line with the requirements of the drawings, but also a special machine for the production of material to withstand voltage insulation test. Applied in a variety of industries, including: drone, ship, communications, medical equipment, industrial automation equipment. Machining Plastic,Oem Precision Machining Plastic,Cnc Machining Plastic,CNC Plastic Machining Hong Kong RYH CO., LTD , https://www.longfeikitchenware.com
Compared with two weeks ago, 22 ships were added to the vessel, and 81,000 TEU was added to the ship. Due to seasonal problems in the winter, ships that were idle were on the rise. Two weeks ago, there were only 6 large vessels above 7,500 TEU in idle state, which was increased to 9 this time. Among the 268 idle vessels, the number of vessels from 1000 to 1999 TEU was the highest, which was 85 (76 vessels two weeks ago). Twenty-seven vessels of the 2000-2999TEU type and 3000-4999TEU type each had a similar number of rings; there were 21 vessels of 5,000 to 7,499 TEU, an increase of 7 vessels from the previous month; 59 vessels of 500 to 999 TEU were used. In general, the rate at which the following boats of Panamas are idle is increasing.
In addition, the price of fuel oil continues to show an upward trend. Therefore, in order to reduce costs, the demand for large ships will further increase. In the future, the idle rate of small and medium-sized ships may increase gradually.