20 Conveying Distance Air Conveyor, Pneumatic Conveying System
Electronics Production Machinery
SF-580is a Automatic Lead Cutting And Bending Triode Forming Machine.Size:1500x1000x1500
1.Apply to LED/light emitting diode,Triode Forming Cutting Machine,aluminum electrolytic capacitor,metallic film capacitor,safety capacitor,quartz crystal and other upright type elements.
2. Import CAM mechanical transmission,precise stable,durable and low noise. Each part has the special hard coating with long service life.
3. The led Lead Forming Machine whole set of system is used PLC control with ultra strong stability.The operator interface is touch screen convenient and easy to lean and the data alignment is more convenient.
4. Speed control of the non-phase fine adjustment of transducer.
5. Upper clipand open clip system are rack and pinion type.The change of fixture centerline is invariant,no harm by clipping and more convenient to change the specification.(D4--(D6are shared the same fixture and(D8-(D10are shared the same fixture.
6. Molding pitch:2.0mm,2.5mm,5mm,7.50mm,10mm,15mm,20mm,25mm
7. Molding/feet cut method:odd leg,90℃bending,incurvature, excurvation and vertical angle,etc.
8. Length of feet cut:2.5mm-28mm.
9. Working pressure:4kg/Cm2
10.The special molding pattern can be customized according to the clients different requirements.
11. The equipment is anti-static.
The Bulk Resistor Radial Cutting Machine is suitable for shaping and cutting feet of various electronic components.Any details you want to know about Automatic Lead Forming Machine please contact us for further more.
Electronics Production Machinery, forming machine, cutting machine SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.singsunautomatics.com
pneumatic conveyor is an advanced material conveying machine. It is compact, flexible and labor-saving. It can load and unload quickly and easily. It can convey by positive pressure separate or suction by vacuum separate or convey by positive and vacuum pressure at the same time after a simple combination. It can be used to convey granular materials on horizontal, inclined and vertical such as soybean, rice, wheat, corn, sorghum, barley malt, plastics and resins etc.
Pneumatic conveyor is widely used to handle materials in bulk loading, bulk conveying, bulk unloading, silo to silo, stack to stack in barn, farm, railway stations, docks, grain processing and brewing industries. When using this machine to convey grains, grains have to be selected and dehydrated.
Working priciple of pneumatic conveyorÂ
Pneumatic grain conveyor is composed of the high pressure blower, air flow control valve, separator tube, air locker, connecting pipe, suction nozzle and conveying pipelines and other components. Its working principle is negative pressure air stream generated by the high pressure blower though the suction nozzle, suctioning the materials into the hose tube, then materials through the separation tube, air and material separated, material fell off into the air locker downward, then materials will be conveyed to the required place by positive pressure air flow. The air separated will go into the blower through the separator tube or the dust collector.
Main technical parameter
Model
SR-5
SR-10
SR-15
SR-20
SR-25
SR-30
SR-50
Fan power
(kw)
7.5
11
15
22
25
37
55
Air-lock valve
(kw)0.75
0.75
1.1
1.1
1.5
1.5
1.5
Power
(kw)8.25
11.75
16.1
23.1
26.5
38.5
56.5
Air flow
(m³/h)800
1000
1600
1800
1800
1800
2100
Fan pressure
(mmH20)
1500
1500
1600
2200
2400
3300
4400
Max horizontal distance
(m)30
50
70
100
100
140
200
 Conveying distance
(m)3
10
15
20
20
30
80
Lift head
(m)5
12
18
20
20
30
42
Capacity
(t)5
10
20
30
23
50
78
Feeding dia
(mm)124
150
150
160
160
160
200
Discharging dia
(mm)100
124
150
160
160
160
200