12V DC Portable Air Compressor Pump, Digital Tire Inflator by 100 Psi

August 17 01:19:55, 2025

12V DC Portable Air Compressor Pump, Digital Tire Inflator with 100 PSI

Item Weight 3.81 pounds
Package Dimensions 9.7 x 7.8 x 5.4 inches
Item Model Number AT-010-1Z
Manufacturer Part Number AT-010-1Z
Folding No
Amperage 15 A
Voltage 12 volts

Product Description

This 12V DC Portable Air Compressor Pump is a powerful and convenient solution for inflating tires on the go. Designed with a digital display, it allows you to monitor pressure in various units such as PSI, KPA, BAR, and KG/CM, ensuring accurate inflation every time.

Important Information Before Your Purchase:

• DO NOT use for LT, HT, or Truck Tires.
• This unit is designed exclusively for 12 Volt DC power.
• Not compatible with 24 Volt systems.

Key Features:

  • Working Voltage: DC 12V
  • Rated Power: 120W
  • Inflation Speed: 1.06 CFM
  • Minimum Amperage: 10A
  • Maximum Amperage: 15A
  • Built-in LED Flashlight for added convenience
  • Maximum Working Pressure: 100 PSI
  • Overheat Protection: Automatically shuts off when temperature exceeds 167°F
  • CE Certified for safety and quality

Operating Instructions:

  1. Ensure the power switch is in the OFF position and the vehicle engine is running.
  2. Remove the dust cap from the tire valve, then attach the air chuck and screw it onto the valve stem.
  3. Plug the power cord into a 12V cigarette lighter socket.
  4. Press the (M) button to select your preferred display unit (PSI, KPA, BAR, or KG/CM). Use the (+) or (-) buttons to set the desired pressure and wait until the display stops flashing.
  5. Turn on the power switch. The compressor will automatically stop once the target pressure is reached.
  6. Turn off the power, unscrew the valve connector, replace the dust cap, and disconnect the power cord from the cigarette lighter socket.

Whether you're on a road trip or just need a quick tire fix at home, this portable air compressor is a reliable tool that offers precision, safety, and ease of use. Its compact design makes it easy to store in your car, and its durable build ensures long-lasting performance.

12V DC Portable Air Compressor Pump, Digital Tire Inflator by 100 PSI
12V DC Portable Air Compressor Pump, Digital Tire Inflator by 100 PSI
12V DC Portable Air Compressor Pump, Digital Tire Inflator by 100 PSI
12V DC Portable Air Compressor Pump, Digital Tire Inflator by 100 PSI
12V DC Portable Air Compressor Pump, Digital Tire Inflator by 100 PSI

PTFE Products

Polytrifluorovinyl chloride (PCTFE) is a kind of engineering plastics with excellent performance, its long-term use temperature is -200∽150 DEG C, has unique rigidity, toughness and low temperature resistance, can withstand all kinds of acids, alkali, oils and most organic solvents, its excellent electrical insulation in a higher temperature range is not affected by temperature and humidity; In addition, it also has outstanding air tightness, surface non-viscosity, high mechanical strength, very low water absorption.

Polytetrafluoroethylene (PTFE) is an engineering plastic with excellent comprehensive properties, which is shown in: a wide range of high and low temperature use, using temperature of -180∽+260 ° C; Excellent chemical stability; High electrical insulation; Protruding surfaces are not sticky; Good lubricity; Excellent aging resistance.
Polytetrafluoroethylene (PTFE) plate is divided into two kinds of molding and turning method; Rods are extruded, pushed or moulded; The film is obtained by turning method.
Plates and bars are mainly used for corrosion resistant gasket sealing, lining, lubricating materials and electrical insulation parts used at various frequencies. Film used for capacitor dielectric, wire insulation, electrical instrument insulation and so on.
Product performance and application
Excellent corrosion resistance
Good electrical insulation performance
High temperature resistant
Low friction coefficient
Non-adhesive can be excellent
Application INDUSTRY: PTFE is widely used in chemical antisepsis, mechanical seal, engineering pipeline, electrical insulation, pump valve fluid, aviation textile, ceramic and other industries
PTFE plate
Thickness 1-100mm width 50-2500mm
PTFE tube
Dia 10-600mm Length 20-1000mm Shrinkable tube Dia1mm to 15mm
PTFE rods
Dia 3-150mm Length 50-1000mm
PTFE membrane
Thickness 0.025 0.1 0.15 0.2mm -6mm width 50mm -1500mm width
PTFE mechanical parts
Elbows, commands, tees, joints, valves, bottles, cans, beakers, cauldrons, etc

Ptfe Sheet,Ptfe Tube,Ptfe Rod,Ptfe Adhesive Tape

Mianyang Prochema Commercial Co.,Ltd. , https://www.gustek.com