The tire of a car is the only part of the car that is in contact with the ground. Its quality directly determines the safety performance of the car, and the tire pressure is directly related to the quality of the tire. . For the tire pressure of the tires of the car, I believe everyone knows that the tire pressure of the car is different in different seasons. So what is the decision on the tire pressure? Today, Beimai.com explains the car tires. What is the tire pressure ?

Usually the tire manufacturer will mark the tire's air pressure value on the tire, so that some owners will inflate the tire according to this value. But in fact this is not right. For different models, the tire pressure is definitely different, so it should be inflated according to the standard tire pressure of the vehicle.

What is the tire pressure of the vehicle?

1. Seasonal factors: Generally speaking, in winter, the standard pressure of automobile tires is used to increase the height by about 0.2 bar; in summer, according to the standard air pressure lower limit of the automobile tires, the summer car is parked in the open air, and the air pressure can generally be lower than the standard by about 0.1 bar. In order to avoid high temperature puncture.

2, loading load: empty or half load according to the car tire pressure standard lower limit (the tire pressure on the vehicle marking sticker can be used as the minimum tire pressure reference value); at full load according to the car tire pressure standard upper limit (the tire pressure value on the tire mark can be As a reference for theoretical tire pressure).

3, tire pressure measurement environment: the tire pressure of the cold tire and the hot tire is not the same, should pay attention to the measurement, the difference between the two is about 0.3 bar.

4, driving road conditions: the larger the road surface, properly press the standard temperature of the car tires to reduce the tire pressure 0.1-0.2bar; the small amplitude can be ignored, do not care; run long distance high speed, tire pressure can not be too low, appropriate according to car tires The lower limit of the standard air pressure raises the tire pressure to about 0.2 bar.

5. Tire condition: The tire pressure of the new tire can be increased by about 0.2 bar according to the standard pressure of the automobile tire; the old tire is adjusted to the tire pressure standard according to the tire pressure standard, if the wear is severe, the lower limit of the automobile tire pressure standard; soft tire: That is, the tire of the comfort pattern is appropriately adjusted to a height of about 0.2 bar according to the standard tire pressure; the hard tire: that is, the control pattern tire, according to the lower limit of the standard tire pressure.

Where is the tire pressure of the vehicle standard tire?

1. Vehicle user manual;

2. The label next to the cab door (near the B-pillar);

3. The drawer next to the driver's seat of the vehicle;

4, the fuel tank cover small door;

How to judge whether the tire pressure of the vehicle is suitable?

For the spare tire, because it is not commonly used, the tire pressure is higher, so as to avoid the emergency effect due to the low air pressure. Generally should be higher than 2.5. Adjust to the appropriate tire pressure when in use, and then inflate to a high tire pressure of 2.5-3.0 bar.

Abnormal tire pressure will lead to uneven wear of the tires, the comfort of driving is reduced, and it is related to the safety of driving. In severe cases, it may cause puncture. It is recommended that the owner install tire pressure monitoring to facilitate visual observation of the tire pressure and tire. Whether the temperature parameters are normal.

These are the tire pressures of the car tires that Beimai.com has compiled for you. I hope it will help you. Tires are decisive for the safe western performance of automobiles. In normal times, the maintenance of automobile tires must not be neglected. Regular inspection and maintenance are carried out, and problems are found to be dealt with in a timely manner. Only in this way can the car serve us better and reduce the occurrence of faults.

Medical Sterilization Basket

1. Product material:

Made of high quality stainless steel 304 316 316L and other materials. Material is divided into ginning net, punching plate, welding net and so on.

2. Product Features:

(1) The material is made of high quality stainless steel, welded firmly, the whole body is processed by electric polishing technology, bright, never rust, beautiful and healthy.

(2) The use of micro-spot resistance welding and no butt welding welding technology, so that the product has no outstanding solder spot, no welding damage, no burr edge, no fall off, safe use.

(3) corrosion resistance, no rust, non-toxic and tasteless, smooth surface, no burr, durable.

(4) The grid design facilitates the penetration of water or steam to ensure the cleaning and sterilization effect

3. Scope of use:

Applicable to medical units, hospital departments, such as operating room, supply room, disinfection room, dental clinic, ward and other cleaning, disinfection and sterilization treatment related medical institutions.

It can be used for disinfection and sterilization, ultrasonic cleaning, storage, etc., especially for cleaning, disinfection and sterilization of surgical instruments and medical instruments together in the instrument tray.

Packaging requirements: generally carton packaging, special requirements can also be customized packaging.

Medical Sterilization Basket,Sterilization Basket,Surgical Instrument Baskets,Instrument Sterilization Baskets

Suzhou Haoxiang Screen Stencil Products Co.,Ltd , https://www.shaiwanghaoxiang.com