On December 28th, the trial operation of Shanxi New Energy Automobile Production Line and the unveiling ceremony of Shanxi Geely New Energy Automobile Sales Co., Ltd. was held in Shanxi Province New Energy Automobile Production Base in Longhu West Street, Jinzhong City. This indicates that Shanxi Province has taken the lead in the industrialization of methanol vehicles in the central and western regions of China.
Shanxi New Energy Production Base Project was settled in Jinzhong in 2011, with an annual output of 200,000 vehicles and 200,000 engines. The project is implemented in two phases. The first phase plans to produce 100,000 complete vehicles and 100,000 engines. The production is arranged according to the traditional four major processes, namely stamping, welding, painting and final assembly. As the assembly line enters the trial run, other process lines are also entering the single line.
Since the Geely project was settled in Jinzhong, it has been highly valued and strongly supported by the Shanxi Provincial Party Committee, the Provincial Government, the Jinzhong Municipal Committee and the Government. As a pilot project for comprehensive transformation and transformation of the province and a pilot project for methanol fuel vehicles nationwide, in March 2013, Jinzhong City took the lead in launching a pilot project for methanol vehicles and was identified as a new energy production base in Shanxi Province. Geely's newly developed M100 methanol sedan is the first methanol fuel new energy vehicle approved by the Ministry of Industry and Information Technology and announced by the Ministry of Industry and Information Technology. Judging from the overall situation of the operation of 150 Geely methanol taxis in Jinzhong City for more than a year, the indicators of Geely methanol vehicles have reached or exceeded national standards, and have been fully affirmed by the Ministry of Industry and Information Technology to promote and use methanol for the whole province. The car created the conditions.
In the interview, Liu Xiangyang, vice president of Geely Group, provided the reporter with a set of test data on the exhaust emissions of Geely methanol vehicles, that is, the conventional emission is superior to the national IV, and meets the requirements of Euro V emission. The carbon monoxide emission is equivalent to 23.8% of the Euro V standard. Hydrocarbon is equivalent to 21% of the Euro V standard, and nitrogen oxides are equivalent to 8.33% of the Euro V standard.
Jin Xianyang, vice president of the National Alcohol Ether Fuel and Alcohol Ether Clean Vehicles Committee, said in an interview that methanol is extracted on the basis of the cheapest fuel coal. A large part of China's coal is high-sulfur coal, which belongs to low-quality coal. In the coal reserves, this high-sulfur inferior coal accounts for 40-50% of the total resources. This inferior coal not only pollutes the air, but also pollutes it. Crops, so the state stipulates that these low-quality coals cannot be used as primary energy, and all power stations cannot be used. But these seemingly waste coals can be made into clean energy utilization technology, which is made into a secondary energy source instead of petroleum - methanol and dimethyl ether, turning waste into treasure. As a major coal resource province, Shanxi Province has effectively transformed the advantages of energy resources, eased energy and environmental pressures, accelerated the development and promotion of new energy automobile industries such as methanol vehicles and gas vehicles, and upgraded the level of equipment manufacturing industry. Promote the transformation and upgrading of the industrial economy and walk in front of the central and western regions of the country.
It is reported that Shanxi Province issued "Several Policy Measures for Accelerating the Development and Popularization of New Energy Vehicle Industry in Shanxi Province" clearly pointed out that in 2014-2016, party and government organs and public institutions within the territories of Taiyuan and Jincheng, as well as public transport Among the new or updated vehicles in the public service areas such as cars and taxis, such as urban passenger transportation and sanitation, logistics, airport commuting, and public security patrols, the proportion of new energy vehicles such as methanol should not be less than 40%. The above ratio of Datong, Jinzhong, Changzhi and Yuncheng shall not be less than 30%. The above ratio of other cities shall not be less than 10% in 2014. This also provides great possibilities for the layout of new energy vehicles in Shanxi Province.

Precision Machining Parts

The precision machining we usually talk about generally refers to precision CNC Machining, CNC turning, CNC milling, CNC turning and milling composite machining, grinding, wire cutting, EDM machining, etc. The parts obtained by these machining methods can usually achieve relatively high precision and surface finish. Moreover, Precision Machining Parts has a wide selection of materials, and most materials can be used for CNC machining. Since the precision machining parts need to be machined one by one on the machine tool, the cost of mass production is relatively high compared with the parts that are directly formed by the mold. Of course, the most suitable and reasonable processing method to choose mainly depends on the product materials and the requirements of the product itself. SCZY has very rich experience in Precision Machining Parts and CNC Machining Parts ( They are included the stainless steel machining parts, aluminum machining parts, brass machining parts, titanium machining parts, plastic machining parts etc). Our normal machining accuracy can reach ±0.01mm, and for some special requirements, the accuracy can reach ±0.005mm (depending on specific products). We usually choose the most reasonable method according to the drawing requirements and recommend it to customers. Below are some pictures of precision machined parts for reference only.