Stainless Steel Angular Travel Single Acting Pneumatic Actuator

Model NO.: AT
Model Number: at
Operation: Double Acting ;Single Acting
Place of Origin: Zhejiang
Colour: Blue; Gray; Orange
Accessories: Filter, Limit Switch, Solenoid Valve
Trademark: KT
Specification: CE, ISO9001, FDA
Origin: Zhejiang
HS Code: 8543709990
Model NO.: AT
Model Number: at
Operation: Double Acting ;Single Acting
Place of Origin: Zhejiang
Colour: Blue; Gray; Orange
Accessories: Filter, Limit Switch, Solenoid Valve
Trademark: KT
Specification: CE, ISO9001, FDA
Origin: Zhejiang
HS Code: 8543709990
RT-S Stainless Steel Pneumatic Actuator

Features 

1. Dual Pistion Rack
2. Integrated Design
3. High Output Power
4. Integrated Design
5. Long Service Life
6. Stainless steel fasteners for long term corrosion resistance
7. The interface between piston, pinion and body is made of low friction material

Specifications

1). Actuator Body: Stainless Steel (SS304)
2). Piston: Aluminium Alloy
3). Shaft: Stainless Steel
4). Temperature: -20ºC--+85ºC
5). Torque: 3.5 - 4150Nm
6). Air-Pressure: 2.5 - 8 bar
7). Motion time: 0.25-3S
8). Type: Double Acting, Spring Return (Single Acting)
9). Adjustment Range: ±5°

Standards
a. Interface between actuator and valve: 4 or 8 bolt orifices according to DIN/ISO
    5211, the axle assembles orifice according to DIN 3337 
b. Interface between actuator and control valve: 7100 D/S-7350 D/S according to
    NAMUR or VDI/VDE 3845, 7040 D/S-7090 D/S connecting via the adapter plate 
c. Interface between actuator and signal box: according to VDI/VDE 3845

Introduction
Stainless Steel Pneumatic Actuator (RT Series) 

KT Pneumatic Actuator RT Series is quite suitable for severe, harsh or corrosive working conditions. Body, Bolt/Nut, Shaft, Piston are all made of stainless steel to ensure the anti-corrosion of actuator. It's used to actuate rotary stroke valve, such as ball valve, butterfly valve, etc. I. Front: Air supply connection is designed in accordance with NAMUR Standard to install solenoid valves
II. Bottom: Bottom mounting connection is designed in accordance with ISO 5211/DIN 3337 standards for direct mounting of valve gear boxes or mounting brackets.
III. Upper: NAMUR drive shaft and NAMUR top mounting connection allow the installation of accessories such as limit switch box and positioners.
 

Brand:
KT/OEM
Applicable Media: Water, Oil, Gas, Nitric Acid, Acetic Acid
Certification: CE/API/DNV/FDA/ISO9001-2008
Sample Testing: One Sample for free( Under $10),Freight Collect
Packing: Plastic Bag, Carton & Plywood Case/According to customers' requirement.
Payment:  T/T, L/C, D/P, Western Union, Paypal
Port:  NINGBO/SHANGHAI, Customers' Request
Delivery Time: Within 35days after receiving T/T deposit Payment
Term of Delivery: FOB/CNF/CIF, Customers' Request

RT-S Stainless Steel Pneumatic Actuator

Features 

1. Dual Pistion Rack
2. Integrated Design
3. High Output Power
4. Integrated Design
5. Long Service Life
6. Stainless steel fasteners for long term corrosion resistance
7. The interface between piston, pinion and body is made of low friction material

Specifications

1). Actuator Body: Stainless Steel (SS304)
2). Piston: Aluminium Alloy
3). Shaft: Stainless Steel
4). Temperature: -20ºC--+85ºC
5). Torque: 3.5 - 4150Nm
6). Air-Pressure: 2.5 - 8 bar
7). Motion time: 0.25-3S
8). Type: Double Acting, Spring Return (Single Acting)
9). Adjustment Range: ±5°

Standards
a. Interface between actuator and valve: 4 or 8 bolt orifices according to DIN/ISO
    5211, the axle assembles orifice according to DIN 3337 
b. Interface between actuator and control valve: 7100 D/S-7350 D/S according to
    NAMUR or VDI/VDE 3845, 7040 D/S-7090 D/S connecting via the adapter plate 
c. Interface between actuator and signal box: according to VDI/VDE 3845

Introduction
Stainless Steel Pneumatic Actuator (RT Series) 

KT Pneumatic Actuator RT Series is quite suitable for severe, harsh or corrosive working conditions. Body, Bolt/Nut, Shaft, Piston are all made of stainless steel to ensure the anti-corrosion of actuator. It's used to actuate rotary stroke valve, such as ball valve, butterfly valve, etc. I. Front: Air supply connection is designed in accordance with NAMUR Standard to install solenoid valves
II. Bottom: Bottom mounting connection is designed in accordance with ISO 5211/DIN 3337 standards for direct mounting of valve gear boxes or mounting brackets.
III. Upper: NAMUR drive shaft and NAMUR top mounting connection allow the installation of accessories such as limit switch box and positioners.
 

Brand:
KT/OEM
Applicable Media: Water, Oil, Gas, Nitric Acid, Acetic Acid
Certification: CE/API/DNV/FDA/ISO9001-2008
Sample Testing: One Sample for free( Under $10),Freight Collect
Packing: Plastic Bag, Carton & Plywood Case/According to customers' requirement.
Payment:  T/T, L/C, D/P, Western Union, Paypal
Port:  NINGBO/SHANGHAI, Customers' Request
Delivery Time: Within 35days after receiving T/T deposit Payment
Term of Delivery: FOB/CNF/CIF, Customers' Request


Pallet Decoiler is the horizontal type Decoiler machine which it`s the most simple and easy to unload the coils.

Pallet decoiler is specialized for the soft narrow material uncoiling. It can stock a few coils which the width is less than 150mm and the thickness less than 1.0mm, the total weight less than 2000kgs at one time, it`s usually working with the High Speed Press Machine and high speed feeder machine for making the terminal stamping, metal button stamping, eyelet stamping and small electric parts.

And the feeding speed can reach 24m/min, and the special advantage is suitable for all kinds of the inner diameter.

 



Pallet Decoiler

Pallet Decoiler,Flat Uncoiler Pallet Decoiler,Flat Strip Pallet Decoiler,Industries Pallet Decoiler

Mayflay Machinery(huizhou) Co.,LTD , http://www.pressfeeders.com