Truck drivers are most afraid of encountering special road sections during the shipping process. Like the Panshan Highway, high-speed branching gates, tunnels, and long slopes, they will be very careful whenever they walk, and they will focus their attention on driving. These places are known as high-traffic sections of truck accidents, and accidents can easily happen. Therefore, it is very important for truck drivers to drive by mastering the driving skills of some special road sections. Today Xiao Bian mainly introduces some driving skills for truck drivers when they are on a long slope:

Pressing the brakes down the long slope is the key:

1, light, heavy vehicles are different, depending on the situation changes

Many people who drive cars also feel that the brakes are very good. So what's the use of the brake? Of course it is also useful, but it is only useful if the road conditions are good and the light car is pulled; if you really pull the goods on the road, the brakes will be no more than two or three, and the length and slope of the slope will be different. The specific operation method will also be slightly different. When you are on a long slope, do not apply the brakes frequently. Instead, you must have a certain degree of control over your own speed.

2, keep low speed

In the process of driving, if a long slope is found, the truck driver should put the truck's gear into the low gear in advance, and then slowly downhill. If the downhill speed is too fast, accidents can easily occur.

3, see the speed on the brakes, do not always brake

When driving downhill, if the speed is too fast, step on the brakes to suffocate, quickly reduce to low gear, open the auxiliary brake, and let the braking force of the engine control the speed. Do not use a brake to apply the brakes, as the brake may cause the brakes to overheat and the air pressure is too low, causing the brakes to malfunction.

The truck has auxiliary brakes and must be used:

The current truck configuration and functions are very complete. If your truck has auxiliary braking systems, such as hydraulic retarder, exhaust butterfly valve brake, exhaust valve brake, etc., it must be used. The auxiliary braking system cooperates with the brakes to make the truck safer in the downhill process.

Editor's Note: For trucks, the most important thing is not how much money a pull can make, but how safe it is to pull it. When trucks are on a long slope, inspections of trucks should be done in advance. Ensure all aspects of truck performance are normal and focus on checking truck brakes.

Machining Steel

Machining Steel is the use of CNC machining out,and the machining services including drilling, boring, cutting,meatl bending/metal bending, machining Steel Product material: carbon steel, 20#, 45#, A3, Q235,35Cr2MnMo and other series. In the high-speed machining out of the workpiece has a good finish. But machining Steel of the workpiece is easy to rust, so it will do heat treatment, surface nickel plating, chromium plating, surface black heat treatment, etc.. We have a special inspection department to carry out inspection, ensure the material aging hardness and each size to meet the requirements of the drawings, including the machining steel parts application in various industries: automotive, marine, communications, medical equipment, industrial automation equipment.Except them,we supply the sheet metal operations.

Machining Steel, CNC Machining Steel, Machining Steel Parts, Metal Machining

Hong Kong RYH CO., LTD , https://www.szcncturning.com