Rubber Machinery Screw and Barrel
An excavator ripper is an attachment that is used with an excavator to break up hard materials such as rock, concrete, and asphalt. It is a heavy-duty tool that is designed to penetrate the earth's surface and rip through the toughest of materials. The ripper is typically made up of a large metal claw that is attached to the end of the excavator's arm. The claw is then used to dig into the ground and break up the material, making it easier to remove and transport. Excavator rippers are commonly used in construction, demolition, and mining operations. Ripper Tooth For Excavator,Stump Ripper For Excavator,Root Ripper For Excavator,excavator Digger Ripper CATSU Hydraulic Machinery Equipment Co.,Ltd , https://www.tiltrotatorcat.com
Screw for Rubber Machine
Specification:
Diameter of pin screw and barrel: Φ 75mm-Φ 200mm
Diameter of cold feed or hot feed screw and barrel: Φ 30mm-Φ 300 mm
L/D ratio: 12-18
Technical Information
Base Materials:
1)38CrMoAlA(JIS SACM645)
2)42CrMo(AISI 4140)
3)4Cr5MoSi V1 (JIS SKD-61)
4)9Cr18MOV
5)HPT
Bimetallic alloy materials:
1)Fe-based alloy
2)Ni-based alloy/Deloro alloy
3)Co-based alloy
4)NiCo-based alloy
5)Tungsten carbide/Wolfram carbide
Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy welding
Bimetallic alloy centrifugal casting
Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: >=950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm
Warranty and service: 1 year
Our advantages:
1)Excellent raw materials
2)Good customer service
3)Rapid delivery
4)Reasonable price
5)Production quickly
Experienced manufacture, we will be the best choice.