Register with 200: 1, 6+1
Composite Nylon Plastics Material PBT properties of PBT Pbt G30,Pbt Resin,Pbt Gf30 V0,Polybutylene Terephthalate Resin Zhejiang Xinli New Materials Co,.Ltd , https://www.shinylon6.com
Technical parameters of electrical watt-hour meter pulse counter
Model
 H-JSQ01ZD
1. Working voltage rating: 3.5~6.5V;
2. Working pulse width rating: 70~320Ms;
3. Rated working pulse interval: ≥ 50MS;
4. Coil resistance: 430± 5%ohm23± 2
5. Velocity ratio: 200: 1
6. Working frequency: 6Hz
7. Step motor driving torque: 30 u Nm;
8. Character wheel material: PC
9. Range of working ambient temperature: -40º C~+70º C
10. Lead length: 90mm, 100mm or 120mm
11, Error-free working period: ≥ 10years
12. Base frame material: Plastic base frame: PC
Mainly using for:
1), Multi-funcational energy meter
2), Prepayment energy meter
3), Reactive energy meter
4), Watt-hour meter
5), Multi-rate watt-hour meters
6), Maximum demand energy meter.
7), Standard electric energy meter
8), Meter for industry and home use.
Notes: This is model mainly export India, Russian, Urkrian and Poland. Welcome to contact with us if you want, Thank you for your attention.
It has high material handling capabilities which will reduce material cost by a good margin.
It is stress-resistant and has great machining and processing ability.
It posses nine sets of short-term mechanical properties like High-strength, toughness, and stiffness.
It has impressive creep resistance, moisture absorption, and excellent dimensional stability.
Polybutylene Terephthalate helps in protecting electrical components with high electric resistance.
Appropriate flame-resistant grades are also available in specific cases.
Good UV blocking coupled with good heat ageing behaviour
PBT material has high heat deflection temperatures and a high-temperature index, which helps resist short-term thermal excursion and longer-term heat exposure.
Decent durability in tough chemical environments, especially in automobile underhood applications.
Fantastic chemical resistance against chemicals like alcohols, aromatic hydrocarbons, ketones, diluted acids, oils, solvents, greases. That makes it highly suitable for making plastic parts in constant contact with oils and gasoline.