Model NO.: FP
Model NO.: FP
 Expanded perlite plant
Â
The expanded perlite is one kind of white granule with Honeycomb structure inside and it is produced when Perlite ore Preheated and Instantaneous high temperature roasted. The Principle is that expanded perlite is crushed by the ore, dealed with the rapid heating (1000ºC above). After the moisture vaporization ores and minerals in the particles soften internal expansion, the formation of porous structure, expansion to the original 10-30 times.It is divided into two types according to expansion technology and usage and they are open cell and closed cell.
Â
The closed cell perlite is also called glazed hollow bead. The product requires perlite ore with special particle size to take expansion in the furnace. By this way, especially the precisely controlling the temperature and the material's retaining time in furnace , the surface of expansion perlite shall be melted and close all air cells. The apperance comes like ball but cell inside. Compared with traditional open cell perlite, besides the same thermal insulating and acoustic insulation properties, its outstanding characteristic is high intensity, light weight, heat preservation, low water absorbability as well as good miscibility. It is green inorganic light adiabatic material with high performance.
Â
High daily yield and fuel natural gas. Equipment List for whole production line:
Expansion Furnace
Operating Platform
Distributing Device
Receiver
Bucket Elevator
Heat Exchanger
Preheating Furnace
Loading Hopper for Reheating Furnace
Water Scrubber
Feeding Blower for Closed Cell Type
Blower
Draught Fan for Preheating Furnace
Pulsed Jet Cloth Filter
Air Compressor
Centrifugal Water Pump
Electronic Control Station
Process:
Drying Material→Transportation→Extrusion→Dust Removing→Packed and store→Collection
The expanded perlite is white granular (internal cellular structure), non-toxic, odorless, nonflammable, non-corrosive, PH value is neutral (PH6.5-7.5), acid and alkali resistance, light weight, has a strong role in the adsorption and thermal insulation.
Main chemical composition:
SiO2 68-76%
Al2O3 11-16%
 Na2O 4-5%
Â
Â
Open cell type with coal gasifier heating
| Model |
BW-PKM-730 |
| Fuel gas power |
600-1000KW |
| Coal gas consumption |
200NM3/h |
| Operation temperature |
<1200ºC |
| Heating type |
direct heating |
| Burner |
1set |
| Heating time |
<3.5h |
| Daily yield |
50-80T |
Our factory is specialized in perlite equipment manufacturer, is mainly engaged in a perlite expansion furnace and dust removal equipment design, development, production and sales in one of the private enterprises.
 Expanded perlite plant
Â
The expanded perlite is one kind of white granule with Honeycomb structure inside and it is produced when Perlite ore Preheated and Instantaneous high temperature roasted. The Principle is that expanded perlite is crushed by the ore, dealed with the rapid heating (1000ºC above). After the moisture vaporization ores and minerals in the particles soften internal expansion, the formation of porous structure, expansion to the original 10-30 times.It is divided into two types according to expansion technology and usage and they are open cell and closed cell.
Â
The closed cell perlite is also called glazed hollow bead. The product requires perlite ore with special particle size to take expansion in the furnace. By this way, especially the precisely controlling the temperature and the material's retaining time in furnace , the surface of expansion perlite shall be melted and close all air cells. The apperance comes like ball but cell inside. Compared with traditional open cell perlite, besides the same thermal insulating and acoustic insulation properties, its outstanding characteristic is high intensity, light weight, heat preservation, low water absorbability as well as good miscibility. It is green inorganic light adiabatic material with high performance.
Â
High daily yield and fuel natural gas. Equipment List for whole production line:
Expansion Furnace
Operating Platform
Distributing Device
Receiver
Bucket Elevator
Heat Exchanger
Preheating Furnace
Loading Hopper for Reheating Furnace
Water Scrubber
Feeding Blower for Closed Cell Type
Blower
Draught Fan for Preheating Furnace
Pulsed Jet Cloth Filter
Air Compressor
Centrifugal Water Pump
Electronic Control Station
Process:
Drying Material→Transportation→Extrusion→Dust Removing→Packed and store→Collection
The expanded perlite is white granular (internal cellular structure), non-toxic, odorless, nonflammable, non-corrosive, PH value is neutral (PH6.5-7.5), acid and alkali resistance, light weight, has a strong role in the adsorption and thermal insulation.
Main chemical composition:
SiO2 68-76%
Al2O3 11-16%
 Na2O 4-5%
Â
Â
Open cell type with coal gasifier heating
| Model |
BW-PKM-730 |
| Fuel gas power |
600-1000KW |
| Coal gas consumption |
200NM3/h |
| Operation temperature |
<1200ºC |
| Heating type |
direct heating |
| Burner |
1set |
| Heating time |
<3.5h |
| Daily yield |
50-80T |
Our factory is specialized in perlite equipment manufacturer, is mainly engaged in a perlite expansion furnace and dust removal equipment design, development, production and sales in one of the private enterprises.
FORD Starter : FORD PMGR, 4', 4.5',
POINTS TO ATTENTION:
1- Keep a careful check on gear ring before installation, replace one if damages.
2-Installed surface of both motor and generator should be kept clean, Make sure the strength to the bolts.Such as Electric Motor Starter.
3- Clean each connection port, Strictly observed the sketch, Make sure of firm connection and tight electric conduction.
4- Check if the key could be automatic
FORD Starter
FORD Series, FORD Starter, FORD Starter Motor, FORD Focus Starter Motor, FORD Car Starter,Electric Motor Starter
NINGBO ZHONGWANG AUTO FITTINGS CO.,LTD , http://www.autostarter-alternator.com