YB series self-priming rotary vane pump is with by-pass valve built-in. The pump uses a rotor with sliding vanes to drive the liquid transfer. The material of construction is nodular cast iron with self-lubricating vanes. Due to its superior performance, the pump can handle viscous and volatile liquid and require less horsepower than other equivalent pumps. The pump has its obvious advantage in the transmission of high flow at low revolution. Application Oil tank truck Fleet refueling. Lube oil Aviation refuelers Transmission of petrochemicals, gasoline, diesel, biofuel, solvent, etc.
Installation
With cardan shaft or hydraulic motor, the pump can be installed on oil tank trucks. And also it can be installed on metal baseplates with motor or diesel engine, using for high flow fuel dispensers and floating fuel equipments which are compose of pumps and flowmeters. Equipped with Teflon seals, the pump can also transfer a wide variety of solvent in the petrochemical industry.
The air-cooled screw low-temperature chiller, with shell-and-tube evaporator and condenser, and fin heat exchangers, works well for R22, R404A, R410A, R134A, R407C, R513A, and other refrigerants. Most applications are for freezing processes in medicine, chemical industry, electronics, food processing, etc. The unit has a cooling capacity range 60kw~340kw with an outlet temperature 5C~-35C.
For an integrate system, our air cooled chiller can also come with water pump, water tank, for a modularized package.
Air Cooled Water Chiller,Cooling Air Chiller,Heat Recovery Chillers,Air Cooled Chiller Refrigerant
