OEM Agricultural Parts with Carbon Steel by Forging
Nox Sensor 24V for Scania car, Automobile sensor Scania auto parts 24V Nox sensor is suitable for Scania tail gas treatment.
Nox sensor is one of the key components of SCR post-treatment system. It is used to measure the concentration of nitrogen and oxygen in engine exhaust to meet the needs of closed-loop control of engine aftertreatment system and on-board OBD diagnostic system. It can be applied to gas engine or diesel engine. Its structure includes ceramic probe, cable and processing chip controller, which is connected with ECU through can communication.
The effects of Nox sensor damage are as follows:
1. If the Nox sensor is damaged, the diesel control system is in an open-loop state, that is, the emission data cannot be accurately fed back, and the engine control unit cannot accurately adjust the emission. At this time, the vehicle's emission must exceed the standard. If it always exceeds the standard, the service life of tail gas emission treatment equipment will be shortened.
2. Because it is a key component for measuring the excessive exhaust of diesel vehicles. If it is damaged or works poorly, it will directly cause multiple fault lights of the engine to turn on. At the same time, there will be relevant fault storage records in the control unit.
3. The damage of Nox sensor will lead to the disorder of diesel combustion control, resulting in weak acceleration, idle jitter, unable to start and so on.
Once a problem occurs, the Nox sensor needs to be replaced in time. It is usually installed at the rear end of the catalyst in the exhaust pipe.
Nox Sensor 24V For SCANIA Car,Scania Accessories 24V Nox Sensor,Scania Auto Parts 24V Nox Sensor,Scania Vehicle Use 24V Nox Sensor Ruian OKOOO Electronic Technology Co., LTD , https://www.okoosensor.com
Specifications:
Description:
Shaft
Application:
Motor Machinery
Material:
Aluminum
Material Grade:
GB, ASTM , AISI , DIN , BS, JIS, NF
Drawing Format accept:
Pdf,Jpg,CAD,IGS,STP,Pro-E
Mould Tooling:
Made by CNC Machine
Casting Process:
Mainly Machining Process:Die casting/Forging
By CNC
Surface Roughness
Ra1.6
Lead time for sample
25-30 days
Delivery for normal order
30-35 days
Heat Treatment
Anealled
Surface treatment
Sand blast
Payment terms
T/T or negotiable
Delivery port departure
Ningbo, Shanghai port
Test Equipment:
 
Why Choose us:
*Zhongda had been engaged in Casting and Machining industry for more than 18 years.
Â
*The whole production cycle is monitored by our Quality Management System ISO 9001:2008 certified.
* We now supply all forms of casting parts and cnc machining parts:  lost wax investment casting, sand casting, and cnc machining services.Â
Â
* Rich OEM service experience.
Â
* Our products has been sold to more than 30 countries, we are very familiar with the whole markets, expecially for Europe, North America,Australia and Canada markets.
Â
* Our Commitment & Responsiblity:
   1.Competitive Price
   2.Strict Quality Control
   3.Quick Response To Any Inquires,Complaint,Technical Problem,etc
   4.Timely DeliveryÂ
     5.Small Quantity Acceptable
FAQ:
1. How long can I get the price?
Prices will be quoted within 24 hours after we get your inquiry with detailed information ( including drawings, material, surface treatment,quantity, special requirements,etc).
Â
2.How can I get a sample to check your quality?
On the case of quotation confirmed.Sample will be free of charge for customer approval, freight collect.
Â
3.How long can I expect to get the sample?
It depends on, normally 25 days~30 days (including mould making time). Samples will be shipped by DHL, FedEx, UPS, TNT or EMS,ect.
Â
4.What about the leading time for mass production?
It depends on the order quantity. Normally, 30~45 days after receiving of deposit.Â
Â
5.What is your MOQ?
We don't have a strict limit, small quantity is also workable.
Â
