Nitrogen complete system for furance heating treatment
 

1.PSA is a kind of advanced gas separation technology, It in today's world of the gas supply has irreplaceable.

About Adsorbent 

 

Adsorbent is a PSA central part of nitrogen making equipment. Generally, PSA nitrogen making the equipment selection is carbon molecular sieve, It traps the oxygen in air, carbon dioxide, water, but the nitrogen can't be adsorption.

 

Pressure Swing Adsorption Principle 

 

In the case of adsorption equilibrium, Any kind of absorbent adsorption in the same gas, gas pressure is higher, the greater the amount of the absorbent suck; Conversely, the lower the pressure, the adsorption quantity of the greater the amount the smaller suck. 

 

 

As mentioned above, in the air pressure increases, molecular sieve adsorption of carbon oxygen, carbon dioxide and water. When the pressure to the atmospheric pressure, Carbon molecular sieve to oxygen, carbon dioxide and water adsorption capacity is very small

 

PSA equipment is mainly composed of A and B two molecular sieve adsorption tower with carbon and control systems. When compressed air (pressure is commonly 0.8 Mpa) from next to first through A tower, Oxygen, carbon dioxide and water be carbon by molecular sieve adsorption, but the nitrogen is through out from the top. When A molecular sieve adsorption tower saturated and then it switch to B tower above of adsorption process and at the same time A tower to regenerate A molecular sieve. The so-called renewable, Adsorption tower is the atmosphere to vent to quickly reduce pressure to atmospheric pressure, make the molecular sieve adsorption of oxygen, carbon dioxide and water in from molecular sieve to release.

 
2. Compressed air clarification system

Compressed air pass through 9 grade filters,then pass through cooling type dryer.let the compressed air cooling,let the vapour in the air condensation into water,along with dust,oil drain out the machine.It's better to put the cooling dryer in the compressed room.

After the cooling dryer is the filters,there are two group filters,one is 7 grade main pipeline filters,another is 5 grade high quality oil removing filter.7 grade main pipeline filter precision is 1um,filter out 1um and larger solid state and liquid particle,vestigital oil content 1ppm w/w.5 grade high quality oil removing filter filtrate precision 0.01um,remove 0.01um and larger solid state and liquid particle, 99.9999+% oil,the rest oil content 0.001 ppm w/w. Compressed air quality can reach 1 class according to ISO8573.1. Such clean and dry compressed air can inlet active carbon filter,air buffer tank then inlet nitrogen generator part,after PSA device make out the nitrogen purity ≥99%.

 
3. Pressure Swing Adsorption Nitrogen making system
Pressure swing adsorption (PSA) is an advanced gas separate technique,it is widely used in gas supply field in the world.
3 .1  Adsorbing material
Adsorbing material is the center part of PSA nitrogen generator,Normally use the the Carbon Molecular Sieve,it can adsorb the oxygen,CO2,water in the air,but can't adsorb the nitrogen..
3.2  PSA principal 
Because O2 and N2 these two gas molecule have diffusion rate difference on the molecule sieve surface,O2 smaller diameter can diffuse faster,most of them inlet micropore of CMS,the large diameter N2 diffuse slowly,less of them can inlet ,use this adsorption difference come true O2 and N2 separate.



Normal purity N2 generator main parts.
 

 

 

Features:

1. The nitrogen purity can be adjusted from 95%-99.99%. The nitrogen gas is dry and its dew point is low, these help to preserve the food.

2. The machine features excellent cost effectiveness and fast capital payoff.

3. Its exterior is concise and small, so is to be conveniently cleaned and meet the high cleanliness requirement of the food industry.

4. The product is made of high quality equipments and its skillfully process makes itself durable in use.

After Service:

 
1) Debugging

 Nitrogen generator is a simple machine, many customers can debugging themselves according to our drawing and operation manual.  

And if you require our technica person come to your factory to guide debugging,it's also be ok.We have a after service team. They can train your operating team in your factory.
 

2) Spare Parts Service

We will supply spare parts for 1 year free.

3) Maintenance 

All the details you can follow our operation manual ,and if can't solve problem, please contact our after service department,they will help to solve your problem.


Packing&Loading:


 

Nitrogen complete system for furance heating treatment
 

1.PSA is a kind of advanced gas separation technology, It in today's world of the gas supply has irreplaceable.

About Adsorbent 

 

Adsorbent is a PSA central part of nitrogen making equipment. Generally, PSA nitrogen making the equipment selection is carbon molecular sieve, It traps the oxygen in air, carbon dioxide, water, but the nitrogen can't be adsorption.

 

Pressure Swing Adsorption Principle 

 

In the case of adsorption equilibrium, Any kind of absorbent adsorption in the same gas, gas pressure is higher, the greater the amount of the absorbent suck; Conversely, the lower the pressure, the adsorption quantity of the greater the amount the smaller suck. 

 

 

As mentioned above, in the air pressure increases, molecular sieve adsorption of carbon oxygen, carbon dioxide and water. When the pressure to the atmospheric pressure, Carbon molecular sieve to oxygen, carbon dioxide and water adsorption capacity is very small

 

PSA equipment is mainly composed of A and B two molecular sieve adsorption tower with carbon and control systems. When compressed air (pressure is commonly 0.8 Mpa) from next to first through A tower, Oxygen, carbon dioxide and water be carbon by molecular sieve adsorption, but the nitrogen is through out from the top. When A molecular sieve adsorption tower saturated and then it switch to B tower above of adsorption process and at the same time A tower to regenerate A molecular sieve. The so-called renewable, Adsorption tower is the atmosphere to vent to quickly reduce pressure to atmospheric pressure, make the molecular sieve adsorption of oxygen, carbon dioxide and water in from molecular sieve to release.

 
2. Compressed air clarification system

Compressed air pass through 9 grade filters,then pass through cooling type dryer.let the compressed air cooling,let the vapour in the air condensation into water,along with dust,oil drain out the machine.It's better to put the cooling dryer in the compressed room.

After the cooling dryer is the filters,there are two group filters,one is 7 grade main pipeline filters,another is 5 grade high quality oil removing filter.7 grade main pipeline filter precision is 1um,filter out 1um and larger solid state and liquid particle,vestigital oil content 1ppm w/w.5 grade high quality oil removing filter filtrate precision 0.01um,remove 0.01um and larger solid state and liquid particle, 99.9999+% oil,the rest oil content 0.001 ppm w/w. Compressed air quality can reach 1 class according to ISO8573.1. Such clean and dry compressed air can inlet active carbon filter,air buffer tank then inlet nitrogen generator part,after PSA device make out the nitrogen purity ≥99%.

 
3. Pressure Swing Adsorption Nitrogen making system
Pressure swing adsorption (PSA) is an advanced gas separate technique,it is widely used in gas supply field in the world.
3 .1  Adsorbing material
Adsorbing material is the center part of PSA nitrogen generator,Normally use the the Carbon Molecular Sieve,it can adsorb the oxygen,CO2,water in the air,but can't adsorb the nitrogen..
3.2  PSA principal 
Because O2 and N2 these two gas molecule have diffusion rate difference on the molecule sieve surface,O2 smaller diameter can diffuse faster,most of them inlet micropore of CMS,the large diameter N2 diffuse slowly,less of them can inlet ,use this adsorption difference come true O2 and N2 separate.



Normal purity N2 generator main parts.
 

 

 

Features:

1. The nitrogen purity can be adjusted from 95%-99.99%. The nitrogen gas is dry and its dew point is low, these help to preserve the food.

2. The machine features excellent cost effectiveness and fast capital payoff.

3. Its exterior is concise and small, so is to be conveniently cleaned and meet the high cleanliness requirement of the food industry.

4. The product is made of high quality equipments and its skillfully process makes itself durable in use.

After Service:

 
1) Debugging

 Nitrogen generator is a simple machine, many customers can debugging themselves according to our drawing and operation manual.  

And if you require our technica person come to your factory to guide debugging,it's also be ok.We have a after service team. They can train your operating team in your factory.
 

2) Spare Parts Service

We will supply spare parts for 1 year free.

3) Maintenance 

All the details you can follow our operation manual ,and if can't solve problem, please contact our after service department,they will help to solve your problem.


Packing&Loading:


 

Automatic Sliding Door Operators

High quality door residential automatic door opener

Carton+Foam+Bubble Bag and Pallet

Safety & Operation Devices of High Speed PVC Roll up Door:

In consideration of operation safety for high speed PVC roll up door, we provide the photo cell, and wireless safety airbag device as the standard safety device; And to enrich the operation methods of the high speed door, various options are provided such as manual button, transmitter, control box, radar sensor and inductive loop device. Different styles of transparent window are also available for better vision view.

Varied Running Speed of High Speed PVC Roll up Door:

Running speed of High Speed PVC Roll up Door is adjustable: Opening speed from 0.80m/s to 2.0m/s, and closing speed from 0.6m/s to 1.0m/s. Running speed adjustment can be achieved through inverter inside the control box, t to meet the actual needs.

Driving System of High Speed PVC Roll up Door:

Driving system is the core part for the high speed roll up doors. For the motors, we can provide multiple options for different demands, brands including SEW, SIEMENS, SNMA, SEJ and Servo Motor; All the motors are provided with manual brake, that offers emergency operation under power failure. Furthermore, motor power can be applied based on the real door size, in supply voltage 220V single phase and 380V three phase.

sliding door operators, automatic door motor opener, door accessory ,automatic door operators,fast door accessory

SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , http://www.hongfafd.com