Thread Length: Fully Threaded
Transport Package: Cartons
Specification: #8-12
Origin: China
HS Code: 7318140000
Thread Length: Fully Threaded
Transport Package: Cartons
Specification: #8-12
Origin: China
HS Code: 7318140000
Â
DRYWALL SCREWS BULK FINE 6X1 1/4"
Drywall Screws Bulk Fine 6X1 1/4" has Black Phosphate finish. It's bugle head sets them to right depth without tearing paper. Use these screws to attach drywall or wallboard to metal or wood studs and joists without the need for predrilling. Drywall Screws Bulk Fine 6X1 1/4" comes in bulk package.
Â
Features:
Item: Drywall Screws |
System of Measurement: Inch |
Type: Standard |
Driver Size: #2 |
Application: For Attaching Drywall to Wood Stud |
Size: #6 |
Material: Carbon Steel |
Length: 1-1/4" |
Finish: Black Phosphate |
Head Dia.: 0.319-0.331 |
Thread Type: Fine |
Point Type: Sharp |
Head Type: Bugle |
Head Height: 0.236 |
Drive: Phillips |
Country of Origin (subject to change): China |
Â
M2.5 Tapping Screws Hex Socket Cap Head Self-Tapping Screw
Â
DRYWALL SCREWS BULK FINE 6X1 1/4"
Drywall Screws Bulk Fine 6X1 1/4" has Black Phosphate finish. It's bugle head sets them to right depth without tearing paper. Use these screws to attach drywall or wallboard to metal or wood studs and joists without the need for predrilling. Drywall Screws Bulk Fine 6X1 1/4" comes in bulk package.
Â
Features:
Item: Drywall Screws |
System of Measurement: Inch |
Type: Standard |
Driver Size: #2 |
Application: For Attaching Drywall to Wood Stud |
Size: #6 |
Material: Carbon Steel |
Length: 1-1/4" |
Finish: Black Phosphate |
Head Dia.: 0.319-0.331 |
Thread Type: Fine |
Point Type: Sharp |
Head Type: Bugle |
Head Height: 0.236 |
Drive: Phillips |
Country of Origin (subject to change): China |
Â
M2.5 Tapping Screws Hex Socket Cap Head Self-Tapping Screw
It is mainly used for cooling the hot pellets come out of Pellet Mill. The high temperature 70°C-90°C pellet after cooling is less than 3°C-5°C ambient temperature, and reduce to safe moisture content. The cooling pellets not only increase the pellets hardness but also prevent mildew, eaay for storage and transportation.
The counter flow cooling principle is adopted to cool the pellets with high temperature and high moisture. Hot air touches hot pellets and cool air touches cool pellets so as to avoid the pellet surface crack by shock cooling produced by direct contact between cool air and hot pellets. At the same time, the airclosed airclock is adopted for feeding and bigger air inlet area, therefore it can get better cooling effects.
Cooling Equipment
Cooling Equipment,Granular Material Feed Cooling,Feed Cooling Equipment,Feed Pellet Cooler
XinxiangHexie Feed Machienry Manufacturing Co.Ltd , https://www.hxfeedmill.com