Dolly card D6S series, driving width 1730, sheep fat white, single row, engine four SD4BW754V, 75KW/102 horsepower, 5 files, frame 188mm, front and rear axle 1.8 tons rear axle 3.5 tons, 7.00 wire tire, moving, gas Brake, clutch boost, ABS, 12 volt battery.

【The main technical parameters】

Product trademark Chusheng

Announcement Lot 281

Product Name CSC5070GJY4 Fuel Truck

Product No. ZKSVB52N05W

Total mass (Kg) 7300

Tank volume (m3) 5.15

Rated load mass (Kg) 3435, 3500

Dimensions (mm) 5990×1950×2300, 2500

Curing quality (Kg) 3670

Cargo size (mm) × ×

Rated passenger (person)

Quasi-trailer total mass (Kg)

Number of passengers in the cab (person) 3,2

Load mass utilization factor

Approach angle / departure angle (°) 19/15

Front overhang / rear overhang (mm) 1032/1658
Number of axes 2

Wheelbase (mm) 3300

Axle load (Kg) 2920/4380

Maximum speed (Km/h) 80

Other transport media: gasoline, density: 700 kg / m3, category number: 3; effective volume of the tank: 5.15 cubic meters, tank dimensions (length × width × height) (mm): 4000 × 1700 × 1100 ( The tanker is mounted on the left or right side of the frame, 4000×1750×1250 (the tanker is installed in the front of the tank, and the tanker is 800mm long). The side protection is made of cold-formed steel / Q235B, bolted. The rear protection is made of cold-formed steel/Q235B, welded, with a section height of 220mm, a section width of 50mm, and a lower edge of 550mm from the ground. Refueling device model and manufacturer: BL1111Z/Zhuhai Beiling Fueling Equipment Co., Ltd. Zhongshan Branch, HS1812B/Tokeng Hengshan Technology (Guangzhou) Co., Ltd., SKES-1112/Shanghai Bolai Machinery Co., Ltd., SK20QF-111A, SK20QF- 222A/Zhengzhou Sanjin Petroleum Equipment Manufacturing Co., Ltd., CS20D1110F/Zhengxing Technology Co., Ltd., JSK-70B1121CZ/Sheng Enjia Lijia (Beijing) Petrochemical Equipment Co., Ltd. With the optional chassis cab. Optional rear structure. The vehicle is equipped with a tachograph with satellite positioning function; only the radial tire, speed limit device, auxiliary brake device and chassis of the front disc brake are used; ABS model/manufacturer: 36BG13-30010/Dongfeng Electronic Technology Co., Ltd. System company.

Vehicle parameters

Dimensions
(length × width × height) mm 5990 × 1950 × 2300

Inside the cargo compartment panel (length × width × height) mm

Or volume m3 5.15

Curb weight kg 3670 total mass kg 7300

Drive type 4X2

Chassis configuration and technical parameters

Chassis manufacturer Dongfeng Motor Co., Ltd.

Chassis type DFA1070SJ35D6

Engine manufacturer Jiangsu Sida Power Machinery Group Co., Ltd.

Engine model SD4BW754U

Transmission model 1700010-BD36

Main reducer speed ratio (drive axle speed ratio) 5.857

Tire specification model 7.00R16 14PR

Comprehensive fuel consumption L/100km 15.9

50km/h no-load constant-speed fuel consumption L/100km 11.3

Fuel consumption parameter table

(This article is from Xiamen Chusheng)

Round Open Water Cooling Tower

The whole structure is solid and light;the body and water pond is manufactured with reinforced glass fibre (FRP glass fiber reinforced plastics),never being corrosive. The surface finish is added with ultraviolet inhibitor,which can resist sunshine attack and damage.

All steel and iron material is processed through galvanizing by dipping,Ocorrosion resisting and durable.

Special designed axial-flow type air blower applies belt reduction gear,reducing low noise and sufficient wind; tailor-made water-drop noise
reduction carpet to eliminate water sound.

Apply special design PVC water block curtain (water-stop) to prevents plashing) remarkably; pressure drop loss is slight and splashing loss i under 0.001%.

Apply cellular vacuum molding heat dissipation material, stagger arrangement surface has grooves and the heat exchange effect is especially good.

Round Open Water Cooling Tower,Water Cooling Tower,Round Cooling Tower,Cool Water Towers

Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.fangzhou-arkfluid.com