Characteristic:
1) The machine adopt advanced DSP control system which can continue and optimize the cutting speed, processing path, improve the working efficiency, the clearance compensation ensure the processing quality.
2) High compatibility, can support CAD, CORELDRAW, PHOTOSHOP etc and meet the industry need.
3) Multi-document function : the machine can store 256 files, the machine can still work without computer.
4) All optical isolate system and high speed differential input circuit design protect the signal from distorting and interfere, the system realizes 12 kinds working state output and 16 kinds state input, and the machine can easy operation all over the world.
5) Reasonable design of laser line with industry water chiller, keep the same power-force on each spot, ensure the quality of cutting.
6)  Double laser heads adopt the double linkage design, the distance between two heads can adjust freely. the laser heads can work at the same time and respectively.
7)  Widely used in advertising , LGP, model, clothes, leather industry, mainly used for engraving and cutting board, clothing, leather.

Pls pay attention to the working environment for the double head laser engraver machine:
A: Avoid to put it near others machines with high magnetic and voltage such as welder and launching tower because they may interfere the signal transmission
B: Make sure to use a voltage regulator to keep the voltage stable, voltage fluctuation will hurt the machines
C: Pls use a three-pin socket to make sure the laser machine is connected well
D: You'd better not run it for too long time in an environment of strong acid to strong base to avoid damage precise components.

FAQ:
Q1.What's the guarantee for the product quality?
 A:We offer one-year free maintenance services for our machines. Fault parts with the valid period will be replaced for free except for consumable parts.
 
Q2. Is it easy to operate for the new user ?
A: It is very easy ,we offer you operating manual in English ,also our technician can help you via MSN ,Skype or other instant communication tools.If problems in the process of operation,pls keep your lens and mirrors be clean ,then check your laser tube and talk details to us.
 
Q3. How to maintain the machine?
A: After 3 hours working, it's better close 10 minutes.
B, Keep lens and mirrors clean.
C, The water for laser tube should keep clean and lower temperature, in winter you need input antifreeze.
 
Q4 .How about the life-span of the laser tube ?
A: If you operate the machine rightly, it can reach to 1500 or 3000hours.(RF metal laser tube can max to 10000hours),It depends on your usage
For example, if it works 8 hours per day, the detailed data as follows:
1, If you set the power at 20%-30% of the total power, the service life is about 1-2years
2, If you set the power at 40-50% of the total power, the service life is about 1 year
3, If you set the power at 70%-80% of the total power, the service life is about 6-8 months
 
Q5: How can I know the power of the laser tube has been exhausted?
A: you can check the color of the laser beam ,new and strong laser tube is purple when working, otherwise it will be white color.
   
Q6: Is it harmful to human body when in operation ?
A: It is not harmful, as long as avoid to see it directly
 
7:How to distinguish laser tubes with different powers and applications?
A: 1. Laser tube length(relatively speaking, the longer, the bigger/stronger)
2. Laser tube diameter(relatively speaking, the thicker,the stronger)
3.The machine with bigger laser tube can cut deeper&more quickly, also its light spot is bigger, So, it is better to choose low-power for engrave, such as 40w, 50w, or 60w and strong power for cutting.

Why choose us:
1.Supported by the government of Wuhan City
2.Has its own R & D center, update for technology
3.We are the manufacturer, our price are the most competitive!
4. With 20 years history on researching and producing all kinds of laser machines
5.Our company welcomes AGENTS all over the world

Guarantee&After-sale service
1, Best components, perfect technology and strictly ex factory inspection.
2, 1 year guarantee for whole machine.
3, 24 hours (all days) technical support by call ,e-mail, skype or computer
remote control service by engineer.
4, Multi-language software, operation CD and detailed User Manual together with machine.
5, We offer free training in our factory, engineer oversea service is available if you like.

Our machine series: 
CO2 Laser Engraving and Cutting Machine for most of the non-metal materials. 
Laser Marking Machine fiber laser marker for meta tag,hardware,circuit board,machinery,plastic marking of barcode,symbol,texts,;CO2 laser marker for nonmetal (fabric,leather,textile,PU,paper,cardboard,PVC,etc) of barcode,images,floral,flying dynamic marking effects.
Metal laser Cutting Machine:YAG metal laser cutting machine(can 7-8mm Mild Steel and 5-6mm Mild Steel ), Fiber metal laser cutting machine( can cut 8-12 mm Carbon Steel )

Notice:
Please let us know following informations:
1. What materials you want to cut ?
2. What is the mostly used thickness and what is the maximum thickness?
3. What is the MAX dimension of your materials ?
4. After cuting, what will be the metal used for? 
5. Are you an end user or retailer?
According to your above information,we'll recommend the most suitable machine to you.

Characteristic:
1) The machine adopt advanced DSP control system which can continue and optimize the cutting speed, processing path, improve the working efficiency, the clearance compensation ensure the processing quality.
2) High compatibility, can support CAD, CORELDRAW, PHOTOSHOP etc and meet the industry need.
3) Multi-document function : the machine can store 256 files, the machine can still work without computer.
4) All optical isolate system and high speed differential input circuit design protect the signal from distorting and interfere, the system realizes 12 kinds working state output and 16 kinds state input, and the machine can easy operation all over the world.
5) Reasonable design of laser line with industry water chiller, keep the same power-force on each spot, ensure the quality of cutting.
6)  Double laser heads adopt the double linkage design, the distance between two heads can adjust freely. the laser heads can work at the same time and respectively.
7)  Widely used in advertising , LGP, model, clothes, leather industry, mainly used for engraving and cutting board, clothing, leather.

Pls pay attention to the working environment for the double head laser engraver machine:
A: Avoid to put it near others machines with high magnetic and voltage such as welder and launching tower because they may interfere the signal transmission
B: Make sure to use a voltage regulator to keep the voltage stable, voltage fluctuation will hurt the machines
C: Pls use a three-pin socket to make sure the laser machine is connected well
D: You'd better not run it for too long time in an environment of strong acid to strong base to avoid damage precise components.

FAQ:
Q1.What's the guarantee for the product quality?
 A:We offer one-year free maintenance services for our machines. Fault parts with the valid period will be replaced for free except for consumable parts.
 
Q2. Is it easy to operate for the new user ?
A: It is very easy ,we offer you operating manual in English ,also our technician can help you via MSN ,Skype or other instant communication tools.If problems in the process of operation,pls keep your lens and mirrors be clean ,then check your laser tube and talk details to us.
 
Q3. How to maintain the machine?
A: After 3 hours working, it's better close 10 minutes.
B, Keep lens and mirrors clean.
C, The water for laser tube should keep clean and lower temperature, in winter you need input antifreeze.
 
Q4 .How about the life-span of the laser tube ?
A: If you operate the machine rightly, it can reach to 1500 or 3000hours.(RF metal laser tube can max to 10000hours),It depends on your usage
For example, if it works 8 hours per day, the detailed data as follows:
1, If you set the power at 20%-30% of the total power, the service life is about 1-2years
2, If you set the power at 40-50% of the total power, the service life is about 1 year
3, If you set the power at 70%-80% of the total power, the service life is about 6-8 months
 
Q5: How can I know the power of the laser tube has been exhausted?
A: you can check the color of the laser beam ,new and strong laser tube is purple when working, otherwise it will be white color.
   
Q6: Is it harmful to human body when in operation ?
A: It is not harmful, as long as avoid to see it directly
 
7:How to distinguish laser tubes with different powers and applications?
A: 1. Laser tube length(relatively speaking, the longer, the bigger/stronger)
2. Laser tube diameter(relatively speaking, the thicker,the stronger)
3.The machine with bigger laser tube can cut deeper&more quickly, also its light spot is bigger, So, it is better to choose low-power for engrave, such as 40w, 50w, or 60w and strong power for cutting.

Why choose us:
1.Supported by the government of Wuhan City
2.Has its own R & D center, update for technology
3.We are the manufacturer, our price are the most competitive!
4. With 20 years history on researching and producing all kinds of laser machines
5.Our company welcomes AGENTS all over the world

Guarantee&After-sale service
1, Best components, perfect technology and strictly ex factory inspection.
2, 1 year guarantee for whole machine.
3, 24 hours (all days) technical support by call ,e-mail, skype or computer
remote control service by engineer.
4, Multi-language software, operation CD and detailed User Manual together with machine.
5, We offer free training in our factory, engineer oversea service is available if you like.

Our machine series: 
CO2 Laser Engraving and Cutting Machine for most of the non-metal materials. 
Laser Marking Machine fiber laser marker for meta tag,hardware,circuit board,machinery,plastic marking of barcode,symbol,texts,;CO2 laser marker for nonmetal (fabric,leather,textile,PU,paper,cardboard,PVC,etc) of barcode,images,floral,flying dynamic marking effects.
Metal laser Cutting Machine:YAG metal laser cutting machine(can 7-8mm Mild Steel and 5-6mm Mild Steel ), Fiber metal laser cutting machine( can cut 8-12 mm Carbon Steel )

Notice:
Please let us know following informations:
1. What materials you want to cut ?
2. What is the mostly used thickness and what is the maximum thickness?
3. What is the MAX dimension of your materials ?
4. After cuting, what will be the metal used for? 
5. Are you an end user or retailer?
According to your above information,we'll recommend the most suitable machine to you.

German Series wash pump

German Series Wash Pump,German Series Washer Pump,German Series Windshield Wash Pump,Washer Fluid Pumps

ruian city yixuan auto parts co.,ltd , https://www.yixuanauto.com