Qingdao Haijia Machinery is the governing units of Chinese Textile Machinery! It's sales champion for 15Â consecutive years in China Water Jet Loom's industry!
1.SPECTIFICATION
SOMEÂ Â SPARE PARTS WE USED
2.OUR ADVANTAGE WHY CHOOSE US?
1.Our company service as a whole and is the largest professional manufacturer of jet looms in China.
2. In recent years,  our company has repeatedly won the contract and keeping promises units, high-tech enterprises,  brand-name products and other honorary titles. Through the ISO9001:2000 quality management system certification and ISO14001, OHSAS18001 and other international standards certification.
3.Qingdao Haijia company has a strong processing hardware workshop
4.the service life is long,energy saving,high comprehensive output. 5.Qingdao Haijia company has a strong processing hardware workshop. Now has 38 sets advanced CNC machining center , more than 20 sets Nissan NC lathe , other equipment more than 100 sets,and more than  200 meters automatic paint lines
3.OUR FACTORY
HJ-851#Â Plain Shedding Device Specification
HJ-851#
No.
NAME
ORIGIN\TYPE\PERFORMACE DECRIPTION
1
Wall board
We adopts HJ-851special heavy enhanced, according to TSUDAKOMA Drawing,HT220-230 standard material,large CNC precision machining.
2
Gear in the large box
Adopt Taiwan Datong(TTG)Â gear, ultra-quite,wear-resistant,low vibration and high precision
3
Bearing in the large box
Bearing in the large box is swiden SKF, Bearing out of the large box made in japan.
4
Beating up shaft
Adopt special treatment of solid beating up shaft, centralized oil lubrication in the support sleeve, add in weft counterweight balance system (Haijia patent:201220718493.9), optimization of beating up angle, the beating up more powerful and stable, cloth smooth.
5
Slay
SUS304 stainless steel reinforced and polishing processing slay at the top brand in China, achieve cloth smooth.
6
Stripe
Tianqi stripe, For 102 double stick, strengthening take-up.
7
Plastic stocks
New type and high quality plastic stocks
8
Beam
A number of optimization design on the basis of TSUDAKOMAÂ ZW-851, the beam before and after the five angle pipe, steel material supply, before and after the beam with thickened angle.Especially before the beam on Haijia, unique design, draws on the advantages of air jet loom beam, making solid beating up shaft is more stable.
9
Suction pipe
∮76mm,thickness 6mm,sus304 stainless steel.
10
Cross beam
Heavy and lengthen treatment
11
Tension spring
∮12mm
12
Panel
HJ-851Â Special type
13
Let-off and take -up device
Mechanical or electronic
14
Temple bar,guide
HJ-851 Special type ,3mm stainless steel
15
Temple
Five ring three rows of fine needle puncture (0.3mm) under the pressure of Temple (made fine denier fabric cloth smooth) South Korea Renhe or Jilong brand.
16
Leno parts
Taiwan production assembly (slide seat:Stainless steel, low noise ear wire assembly, running smoothly, long service life).
17
Press roll
New press fabric service,press roll 40#,equal tension take-up
18
Main motor
The Haijia special power of 3.0KW red flag.Save electricity,start fast,low noise,little park,long life and other advantages(self-purchased Japan NACHI bearing)
19
Electronic control system
Xinliao Brand.
20
Measuring
Electronic measuring
21
Light detection weft
Light detection weft, plus plug signal amplifier
22
Code
Electronic code
23
Plunger
Shutai ceramic plunger(39/28 mm)
24
Spring
JAPAN AWA spring(∮10x∮150 mm)
25
Nozzle
Korea MDHÂ 90/60Â nozzle
26
One way valve
Japan AWA valve,up 8# down 9#.
27
Oil seal
Made in Taiwan
28
Cutter parts
Taiwan joint bearing,scissors,scissors spring ,improve efficiency.
29
Suction motor
Electronic suction motor
30
Stabilized tank
Double filter,bucket type.
31
Take heald level liner
American DuPont material production, wear, long service life.
32
Dobby or heald frame
Customer can match by themselves.
33
Painting
TSUDAKOMA yellow color, two times over the primer, topcoat, special paint production line, improve the anti rust effect.
Identify quality supplier, according to the standard drawings, guarantee the material and weight.
  Our company has always been adhering to the "quality to create value for customers"as business purposes. We will try our best  to serve our customers.
 5.EXHIBITION
Â
HJ factory main material difference than before.
No.
ITEM
BEFORE
PRICE
NOW
PRICE
PRICE DIFFERENCE(5500Â¥/set)
1
outside wall board
HT200,made in wangtaiÂ
4600Â¥/Ton
HT250,made in henan province,china largest supplier for cast,same with TSUDOKOMA
6800Â¥/Ton
(6800Â¥-4600Â¥)*394KG/1000=866.8Â¥/set
2
middle wall boardÂ
HT200,made in wangtaiÂ
4000Â¥/Ton
HT250,made in henan province,china largest supplier for cast,same with TSUDOKOMA
5800Â¥/Ton
(5800Â¥-4000Â¥)*160KG/1000=288Â¥/set
3
other HT material
HT150,made in wangtaiÂ
4000Â¥/Ton
HT200,made in henan province,china largest supplier for cast,same with TSUDOKOMA
4800Â¥/Ton
(4800Â¥-4000Â¥)*514KG/1000=411.2Â¥/set
4
ductile iron
QT420,made in wangtai
5000Â¥/Ton
QT450,made in henan province,china largest supplier for cast,same with TSUDOKOMA
  