Chusheng Garbage Truck Technician Shares Driving Skills for Driving Haze Days
Fog day driving, visibility is very low, easy to drive accident, Chu Sheng garbage truck technical commissioner today to share the driving skills Let's follow friends 1. To horn sound Friends in the fog should diligently press the horn to voice their position 2. Be sure to remember to turn on the headlights and fog lights When fog visibility is low, all kinds of lights, such as fog lights, width lights, and double flash lights on the car, must be turned on (except for high beam lights) to remind the front and rear vehicles to avoid evading the lights. 3. Do not overtake the fog It is forbidden to overtake the moving vehicle in foggy weather. If you find that the vehicle in front of you is driving on the right side, do not blindly walk around. Be sure to consider whether or not this vehicle is facing the opposite side of the vehicle. When you exceed the vehicle parked on the roadside, make sure that it has no intention of starting and if you do not come to the opposite side, you must make a horn in due course and bypass the low speed from the left side. 4 must pay attention to control the speed When driving a dump truck in the fog, it is necessary to control the speed. 5. Pay attention to adjust the distance at any time In foggy weather, the visibility is low, and the vehicle distance must be adjusted at any time according to the size and visibility of the fog, so as to ensure that there is a good time for emergency treatment. 6. To clean the window from time to time Condensation of water vapor on the windshield of the fog can damage the sight of the owner. Remember to use the wiper to remove water vapor and improve the visibility of the line of sight. 7. Garbage trucks do not drive as much as possible Foggy days have a poor sight line. When driving, if it is a one-way three-lane road, it would be better to be in the middle of the road and not to drive on both sides of the road. Because visibility is low at this time, it is not easy to handle what happens on both sides of the road. 8. Emergency braking needs careful In fog, emergency braking will make it impossible for the rear vehicle to determine the distance and cause a rear-end collision. 1. The cutting speed of the board divider can be set to high or low.
2. Maximum travel of knife wheel: 600mm.
3. Knife wheel micro-adjustment: 0-2mm.
PCB separator,PCB cutting machine,V-cut pcb separator,V-cut pcb machine SINGSUN ELECTRONIC SCIENCE & TECH CO.,LTD , https://www.singsunautomatics.com
5. Backstop depth adjustable range: 0-150mm, maximum PCB board cutting width: 150mm, maximum PCB board cutting length: 400mm
6. Thickness: 0.2-3.2mm, maximum thickness between V-slots: 0.25-2.0mm
7. Connecting multiple pieces of PCB board in the solder, folding often hurt the line, or will be broken electronic parts, the use of the board splitter can avoid damage, and can improve efficiency and quality.
8. With the walking knife type board splitting machine to divide, can completely reduce the stress, to prevent the cracking of solder joints and parts breakage.
9. Using the upper circular knife under the flat knife method, PCB board to the board splitting machine under the flat knife, switch a step, the upper circular knife moving across to the set point, the PCB board will be cut off and divided, cut off without stripping, the cut is flat.
10. Slitter knife travel can be set at will with the length of the PCB board forward stopping fixed point, stopping fixed point for 0-100-200-300-400mm.
11. Cutter back with cut-off length stopper, according to the different width of the PCB board to do the adjustment, for no V-CUT slot PCB board can also easily cut the board, accurate not oblique cut.
12. Can fine-tune the thickness of various PCB boards, to solve the problem of PCB board V-CUT slot depth.