Carbide Cylindrical Shank Boring Rods for Cutting Tool

Certification: ISO 9001
Condition: New
Thread Type: M4 ~M16
Hardness: 89.5~92.7 Hra
Length: 80~400mm
Diameter: 8~32 mm
Material: 100% Raw Tungsten Carbide
Performance: Excellent Wear Resistance
Advantage: Interchangeable Screw Heads
Usage: Thread Turning Tool, CNC Machine Center
Business Type: Manufacturer
Customzied: Acceptable
Trademark: Lihua
Transport Package: Plastic and Parper Carton
Origin: Hunan, China
HS Code: 8207909000
Certification: ISO 9001
Condition: New
Thread Type: M4 ~M16
Hardness: 89.5~92.7 Hra
Length: 80~400mm
Diameter: 8~32 mm
Material: 100% Raw Tungsten Carbide
Performance: Excellent Wear Resistance
Advantage: Interchangeable Screw Heads
Usage: Thread Turning Tool, CNC Machine Center
Business Type: Manufacturer
Customzied: Acceptable
Trademark: Lihua
Transport Package: Plastic and Parper Carton
Origin: Hunan, China
HS Code: 8207909000

Carbide Cylindrical Shank Boring Rods for Cutting ToolCarbide Cylindrical Shank Boring Rods for Cutting Tool

Anti-vibration Boring bar 
is an important tool for machining in CNC machining. Its purpose is to prevent tools from shanking and to contorl, make tools vibrate which also called CNC extension rod. Especially as the CNC precision machining developing, the traditional CNC machining from 5000 rpm, 6000 to 8000 rpm, after more sophisticated and efficient cutting speed that will be developed to more than 20,000 turn. Such high-speed cutting, Higher requirements of  sufficient seismic performances is needed carbide stamping pole must  be uniform material, consistent performance of its and Precision concentric assurance to achieve such a high  speed cutting operation requirements  

Carbide Cylindrical Shank Boring Rods for Cutting Tool

 

Specification D(mm) L(mm) D1(mm) d(mm) M
MFT08-100-M4 Ø8 100 Ø8 Ø4.5 M4
MFT10-(100-150)-M5/M6 Ø10 100-150 Ø10 Ø5.5 M5/M6
MFT12-(100-200)-M6 Ø12 100-200 Ø12 Ø6.5 M6
MFT15-(100-200)-M8 Ø15 100-200 Ø15 Ø8.5 M8
MFT15.6-16-(100-300)-M8 Ø15.6/Ø16 100-300 Ø15.6-Ø16 Ø8.5 M8
MFT19-20-(100-300)-M10 Ø19/Ø20 100-300 Ø19-Ø20 Ø10.5 M10
MFT24-25-(100-300)-M12 Ø24/Ø25 100-300 Ø24-Ø25 Ø12.5 M12
MFT32-(150-400)-M16 Ø32 150-400 Ø32 Ø17 M16
MFT43-500-M20 Ø43 500 Ø43 \ M16

D1 can be customized as per requirement. 

Carbide Cylindrical Shank Boring Rods for Cutting Tool

If you need more details, please feel free to contact us (Mobile:0086-15173370139 ) or email

Why to use the carbide anti-vibration boring bar? 

Most of the anti-vibration pole of the rod is hollow, to minimize the vibration generated when processing, such as the vibration of the handle for high-precision processing center, can also be used in high-speed carving high-speed milling, the main performance characteristics as follows:

1. High Rigidity
Improve surface finish and perpendicularity. Made of pure tungsten carbide material, excellent rigidity, good shock absorption, no distortion as lateral stiffness too large. 
2.High Precision
Improve dimensional precision. To extend the processing depth, enhance the accuracy of processing & to achieve long, ultra-deep, ultra-high precision machining possibilities.
3. High Efficiency
No welding fracture concerns, emphasizing the variability of the replaceable tool head, a carbide bar can reach dozens of combinations, widely used in Rough & precision processing industrial .
4. Reduce Cost 
Extending the tool life. The Holder can be reused even if the cutter is damaged and Easy and convenient to replace. The tip and the Holder are screwed and run in reverse direction to the spindle.


Why to choose our factory? 
1)  Business Type:  Manufacturer, Factory. ISO9001:2008, SGS.
2)  High precision: 0.001mm
3)  There are all knid of moulds, no needs of mould fee.
4)  Advanced technology, HIP sintering and precision grinding to ensure the goods performance;
5)  100% Virgin pure Raw materials;
6)  Each product through the strict inspections and confirm to the requirements of the lab parameters;
7)  OEM & ODM are welcomed;
8)  Small order is acceptable;
9)  Flexible payment terms (L/C,T/T, western union, Paypal, etc);
10)  Provide custom made service with customer's drawing; Other size could be offered by your requirements;
11)  We make sure to provide you with the best solutions for your individual case. Whether standard items or non-standard items all available;
12) Fast delivery and high quality;
13) Best after-sale service. 

Carbide Cylindrical Shank Boring Rods for Cutting Tool

Our Company
Carbide Cylindrical Shank Boring Rods for Cutting Tool

About Lihua Cemented Carbide 
Established in 1990, specialized in production carbide products more than 20 years and located in the hometown of tungsten carbide in China. We can manufacture all kind of tungsten carbide products. 
Our products sold to worldwide . We have built a long term business relationship with the customers from Italy, Portugal, Germany, Turkey, USA, Mexico, Russia, India, Australia and so on. 

Main Products 
Our Main products include : Carbide Screwed Boring Bar, Plates, Rods, Sticks, Bushings, TP nozzles, 3D Printer Nozzles, Saw Blades, End Mills & Drill Bits, CNC inserts, Value Seats, Rotary Burrs, wheel cutters, Grits, Customized cutter: Woodworking tool cutter, V-cutter, mining tool,  Any customized carbide products are acceptable. 

Month capacity of 15Ton 
We have sophisticated equipment, such as Sintering Furnace, Automatic suppress Machine, Manual Hydraulic Suppress Machine, Ball Mill Machine, Drying Machine, Mixing Machine etc, Our production capacity up to 15 Ton per month. Customized is welcome, customized sample can be ready in 3-5 days and 1 day can deliver for stocks.

Strictly QC 
We have a professional QC team follow to the System of ISO9001:2008, Covering the Raw Materials Incoming, Production Processes, Finished Products and Packaging to ensure high quality products output.


Main Product
Carbide Cylindrical Shank Boring Rods for Cutting Tool

Packing:
Standard or Customized.
1. First packed in plastic boxes sperately
2. Then in paper box, the type can be seen from the special designed part
3. Last in cartons for final shipment 


Shipping Methods: 
DHL, UPS, FEDEX, TNT or as your resquests.

Below shows the estimate delivery time for different courier:
DHL: 5 to 7 working days
FedEx: 7 to 10 working days 
UPS: 5 to 7 working days 
EMS: 10-14 working days 



Contact

Foreign Sales Representative: Lumina
Mobile: 0086 15173370139 (available 24 hours.)

Factory Address: Tower A, 6th Building, Block C, Auto parts park, Tianyuan zone, Zhuzhou 412000, Hunan, China

 

Carbide Cylindrical Shank Boring Rods for Cutting ToolCarbide Cylindrical Shank Boring Rods for Cutting Tool

Anti-vibration Boring bar 
is an important tool for machining in CNC machining. Its purpose is to prevent tools from shanking and to contorl, make tools vibrate which also called CNC extension rod. Especially as the CNC precision machining developing, the traditional CNC machining from 5000 rpm, 6000 to 8000 rpm, after more sophisticated and efficient cutting speed that will be developed to more than 20,000 turn. Such high-speed cutting, Higher requirements of  sufficient seismic performances is needed carbide stamping pole must  be uniform material, consistent performance of its and Precision concentric assurance to achieve such a high  speed cutting operation requirements  

Carbide Cylindrical Shank Boring Rods for Cutting Tool

 

Specification D(mm) L(mm) D1(mm) d(mm) M
MFT08-100-M4 Ø8 100 Ø8 Ø4.5 M4
MFT10-(100-150)-M5/M6 Ø10 100-150 Ø10 Ø5.5 M5/M6
MFT12-(100-200)-M6 Ø12 100-200 Ø12 Ø6.5 M6
MFT15-(100-200)-M8 Ø15 100-200 Ø15 Ø8.5 M8
MFT15.6-16-(100-300)-M8 Ø15.6/Ø16 100-300 Ø15.6-Ø16 Ø8.5 M8
MFT19-20-(100-300)-M10 Ø19/Ø20 100-300 Ø19-Ø20 Ø10.5 M10
MFT24-25-(100-300)-M12 Ø24/Ø25 100-300 Ø24-Ø25 Ø12.5 M12
MFT32-(150-400)-M16 Ø32 150-400 Ø32 Ø17 M16
MFT43-500-M20 Ø43 500 Ø43 \ M16

D1 can be customized as per requirement. 

Carbide Cylindrical Shank Boring Rods for Cutting Tool

If you need more details, please feel free to contact us (Mobile:0086-15173370139 ) or email

Why to use the carbide anti-vibration boring bar? 

Most of the anti-vibration pole of the rod is hollow, to minimize the vibration generated when processing, such as the vibration of the handle for high-precision processing center, can also be used in high-speed carving high-speed milling, the main performance characteristics as follows:

1. High Rigidity
Improve surface finish and perpendicularity. Made of pure tungsten carbide material, excellent rigidity, good shock absorption, no distortion as lateral stiffness too large. 
2.High Precision
Improve dimensional precision. To extend the processing depth, enhance the accuracy of processing & to achieve long, ultra-deep, ultra-high precision machining possibilities.
3. High Efficiency
No welding fracture concerns, emphasizing the variability of the replaceable tool head, a carbide bar can reach dozens of combinations, widely used in Rough & precision processing industrial .
4. Reduce Cost 
Extending the tool life. The Holder can be reused even if the cutter is damaged and Easy and convenient to replace. The tip and the Holder are screwed and run in reverse direction to the spindle.


Why to choose our factory? 
1)  Business Type:  Manufacturer, Factory. ISO9001:2008, SGS.
2)  High precision: 0.001mm
3)  There are all knid of moulds, no needs of mould fee.
4)  Advanced technology, HIP sintering and precision grinding to ensure the goods performance;
5)  100% Virgin pure Raw materials;
6)  Each product through the strict inspections and confirm to the requirements of the lab parameters;
7)  OEM & ODM are welcomed;
8)  Small order is acceptable;
9)  Flexible payment terms (L/C,T/T, western union, Paypal, etc);
10)  Provide custom made service with customer's drawing; Other size could be offered by your requirements;
11)  We make sure to provide you with the best solutions for your individual case. Whether standard items or non-standard items all available;
12) Fast delivery and high quality;
13) Best after-sale service. 

Carbide Cylindrical Shank Boring Rods for Cutting Tool

Our Company
Carbide Cylindrical Shank Boring Rods for Cutting Tool

About Lihua Cemented Carbide 
Established in 1990, specialized in production carbide products more than 20 years and located in the hometown of tungsten carbide in China. We can manufacture all kind of tungsten carbide products. 
Our products sold to worldwide . We have built a long term business relationship with the customers from Italy, Portugal, Germany, Turkey, USA, Mexico, Russia, India, Australia and so on. 

Main Products 
Our Main products include : Carbide Screwed Boring Bar, Plates, Rods, Sticks, Bushings, TP nozzles, 3D Printer Nozzles, Saw Blades, End Mills & Drill Bits, CNC inserts, Value Seats, Rotary Burrs, wheel cutters, Grits, Customized cutter: Woodworking tool cutter, V-cutter, mining tool,  Any customized carbide products are acceptable. 

Month capacity of 15Ton 
We have sophisticated equipment, such as Sintering Furnace, Automatic suppress Machine, Manual Hydraulic Suppress Machine, Ball Mill Machine, Drying Machine, Mixing Machine etc, Our production capacity up to 15 Ton per month. Customized is welcome, customized sample can be ready in 3-5 days and 1 day can deliver for stocks.

Strictly QC 
We have a professional QC team follow to the System of ISO9001:2008, Covering the Raw Materials Incoming, Production Processes, Finished Products and Packaging to ensure high quality products output.


Main Product
Carbide Cylindrical Shank Boring Rods for Cutting Tool

Packing:
Standard or Customized.
1. First packed in plastic boxes sperately
2. Then in paper box, the type can be seen from the special designed part
3. Last in cartons for final shipment 


Shipping Methods: 
DHL, UPS, FEDEX, TNT or as your resquests.

Below shows the estimate delivery time for different courier:
DHL: 5 to 7 working days
FedEx: 7 to 10 working days 
UPS: 5 to 7 working days 
EMS: 10-14 working days 



Contact

Foreign Sales Representative: Lumina
Mobile: 0086 15173370139 (available 24 hours.)

Factory Address: Tower A, 6th Building, Block C, Auto parts park, Tianyuan zone, Zhuzhou 412000, Hunan, China

 

Cold Roll Forming Machine 

The metal profile produced by Roll Forming Machine look beautiful, elegant and noble. They are widely used for garden, factory, hotel, exhibition center and villa, etc.

Cold Roll Forming Machine Components:

Roll forming machine consists of Uncoiler, Coil sheet guiding device, Main roll forming system, Post cutting device, Hydraulic station, PLC control system and Support table.

Optional with Hydraulic Decoiler, Auto Stacker, Safe Cover, Pre-Cutting, Film Covering Device, and so on.

Cold Roll Forming Machine Working Flow:

Decoiling→Feeding & Guiding→Flattening(If needed)→Pre- Punching/Cutting(If needed)→Roll Forming→Post Step pressing/Punching(If needed)→Post Cutting→Finished Products To Support Table

Parameter:
1.Suitable to process:Colored Steel plate, galvanized board
2.Width of the plate:1000/1200/1250mm
3.Roller stations:10-19rows
4.Rolling material: Forging Steel 45#
5.Rolling galvanization thickness:0.05 mm
6.Material of the cutting blade :Cr12
7.Hydraulic oil :40#
8.Dimensions: 9000mm*1700mm*1600mm

9.Motor:4+4kw
10.Thickness of the plate:0.3-0.6mm
11.Productivity:8-10m/min
12.Diameter of the roller:70mm
13.Weight:About 4.6 T
14.Voltage:380V 50Hz
15.Processing precision : within 1.00mm
16.Transportation:one complete machine need one 40feet container to hold
17.Payment term:30%deposit,and balance before delivery
18.Standard components: Chain 1 pcs, Hydraulic oil pipes: 2 pcs, electromagnetism valves 1 pcs. limit switch:2 pcs
19.This machine is composed of feeding table,forming machine, pressing device,cutting device, hydraulic system,computer control system,discharge table.
Optional devices have manual uncoiler,hydraulic uncoiler,auto stacker and so on.



Cold Roll Forming Machine

Cold Roll Forming Machine, Cold Forming Machine, Cold Rolling Machine

Botou Xianfa Roll Forming Machine Factory , http://www.rollformingmachinecn.com