Main parameter 1.  Specification of rolling material: 1250×(0.4-0.8)×L,yield strength ≤250MPa 2.  Working speed: 3.0-4.0m/min (take 350mm pitch of waves as example) 3.  Roller steps: 16 steps 4.  Frame of machine: welded with 350H beam steel 5.  Thickness of wallboard: 16mm 6.  Roller material: adopts superior 45# forged steel,with hard chromium plated 7.  Shaft material: adopts superior 45# forged steel, quenching and tempering 8.  Main shaft diameter:¢70 mm 9.  Main motor power: 5.5KW 10. Hydraulic station power: 11KW 11. Hydraulic station pressure: 10 -12Mpa 12. Electric control system: adopts PLC (Panasonic)frequency control 13. Machine size: 7000x1700x1400(mm)
Profile
Â
Work flow                       Â
Loading   De-coiling & Feeding   Adjusting & Guiding    Roll forming    Punching after roll forming     Cutting     Run our table
Â
Configuratioin
Passively de-coiling
Guiding & Feeding material
Roll Forming
Cutting-to-length
Output panel
Structure features and compositions 1.Structure features a. Simple and reasonable structure, beautiful appearance, .Our whole machine adopts profile steel structure and all processed after welding,so it can work stably and has high efficiency. b. Our machine adopts full automatic accurate fixed length punching and cutting, ends of finished sheets are beautiful and neat, without deformation. 2.Equipment structure BH-1000-820 Glazed tile roll forming machine is equipped with Feeding device (5 T capacity),transmission, main machine and roller, punching after roll forming, cutting device, hydraulic system, electric control system, run out table, etc.
Factory Â
Main parameter 1.  Specification of rolling material: 1250×(0.4-0.8)×L,yield strength ≤250MPa 2.  Working speed: 3.0-4.0m/min (take 350mm pitch of waves as example) 3.  Roller steps: 16 steps 4.  Frame of machine: welded with 350H beam steel 5.  Thickness of wallboard: 16mm 6.  Roller material: adopts superior 45# forged steel,with hard chromium plated 7.  Shaft material: adopts superior 45# forged steel, quenching and tempering 8.  Main shaft diameter:¢70 mm 9.  Main motor power: 5.5KW 10. Hydraulic station power: 11KW 11. Hydraulic station pressure: 10 -12Mpa 12. Electric control system: adopts PLC (Panasonic)frequency control 13. Machine size: 7000x1700x1400(mm)
Profile
Â
Work flow                       Â
Loading   De-coiling & Feeding   Adjusting & Guiding    Roll forming    Punching after roll forming     Cutting     Run our table
Â
Configuratioin
Passively de-coiling
Guiding & Feeding material
Roll Forming
Cutting-to-length
Output panel
Structure features and compositions 1.Structure features a. Simple and reasonable structure, beautiful appearance, .Our whole machine adopts profile steel structure and all processed after welding,so it can work stably and has high efficiency. b. Our machine adopts full automatic accurate fixed length punching and cutting, ends of finished sheets are beautiful and neat, without deformation. 2.Equipment structure BH-1000-820 Glazed tile roll forming machine is equipped with Feeding device (5 T capacity),transmission, main machine and roller, punching after roll forming, cutting device, hydraulic system, electric control system, run out table, etc.
