Automechanika Shangairako gonbidapena 2017 - Txina Lutong
Automechanika Shangairako gonbidapena 2017 - Txina Lutong
China Lutong Parts Plant is a professional OEM & Aftermarket parts supplier, which specialized in diesel engine parts. Our main products include plunger barrel,Control Valve, Injectors,common rail valve, Head rotor (VE Pump Parts), Plunger, Delivery Valve, Cam Disk, Repair Kits, Feed Pump and more.
Water-assisted injection molding: Water-assisted injection molding technology is an advanced injection molding process in which part of the melt is injected into the mold cavity and high-pressure water is injected into the melt through the equipment to finally shape the workpiece.
Due to the incompressibility of water, the water front creates a solid interface, squeezing the inner wall of the product into a cavity, and the water front also acts as a rapid cooling. Therefore, the water supplement has many advantages over the gas supplement. Research and application show that the water supplement can produce thinner and more uniform cavity wall, and the inner surface of the flow channel is very smooth. Especially for thick wall workpiece, the cooling time can be greatly reduced compared with gas auxiliary.
Plastic Parts,Electronic Plastic Parts,Circuit Board Plastic Parts,Injection Molded Plastic Parts Suzhou Dongye Precision Molding Co.,Ltd. , https://www.sjdongye.com
Dear Sir / Madam,
Oso eskertzen dizugu Txina Lutong-ekin epe luzerako laguntza hau.
Zoriontsu eta atsegina egiten zait automechanika Shangai 2017ra, automozioko piezen, osagarrien, ekipamenduen eta zerbitzuen hornitzaileen automobilgintzaren bigarren Automechanika azokan. Automechanika Shanghai azaroaren 29an egingo da - 2017ko abenduaren 2an, Shanghai, Txinako Erakusketa eta Zentro Nazionalean. Ikuskizuna bisitatzen duten bisitari kopurua handitzea espero da, 140.000 herrialde eta eskualde 130.000rekin. Ongi etorri gurekin bisitatu gure kabina 3F68 Hall 3 at.
Automechanika Shanghai 2017
Booth NO .: 3F68, 3. aretoan
Data: 29 Azaroa - 2017ko abenduaren 2a
Helbidea: Erakusketa Nazionala eta Biltzar Zentroa (Shanghai), Txina.
Webgunea: http://
E-posta:
Kontratua: Dennis Shi
Mob.
Tel:
Fax:
Erakutsiko zaizu!
Zurea benetan
High gloss injection molding: Highlights the basic process of injection molding is prior to injection molding, through the use of high temperature and high pressure steam will mould surface rapidly warming, the forming die cavity surface temperature of resin plastic glass transition temperature (Tg) above, then the plasticizing good plastic melt into the closed mold cavity, the injection stage, mold temperature by high temperature and high pressure steam remains the same, When the injection is finished, the air supply is stopped, and the water vapor in the pipe is blown clean by air pressure of the air pipe. After that, the cooling water is injected to make the mold temperature drop rapidly until the mold is cooled and the product is removed by opening the mold