Advantages of using soil moisture tester
aluminium solar panel frame,aluminum solar panel frame,solar panel aluminium profile,aluminium frame solar panel,aluminium solar frame Guangdong Huachang Group Co., Ltd. , https://www.huachangaluminium.com
The soil moisture tester will screw the sensor probe into the body socket, turn the switch to ON, and display 000.5 on the LCD screen. If it is not in this range, adjust the zero adjustment knob slowly so that the number is displayed within 000.5. The probe is inserted into the test object. After the number is stabilized, the displayed number is the moisture value of the test object.
Verification of the value measured by the soil moisture meter: When there is an error in the measured value, turn the dial. Such as: the actual water content of the measured object is 5%, with a 7-speed test display value is 4%, rotate the dial counterclockwise, so that the display shows 5%, and then look at the position of the dial is a few, later measuring the same type This material is selected when the material. If the displayed value is greater than the actual moisture value, turn the dial clockwise so that the value reaches the actual moisture value. Also note the next gear, you do not need to check later.